Xunlong Orange Pi 4 Pro (xunlong-orangepi4-pro)
Appearance
| This device is marked as not booting. |
|
Orange Pi 4 pro Orange Pi 4 pro | |
| Manufacturer | Xunlong |
|---|---|
| Name | Orange Pi 4 Pro |
| Codename | xunlong-orangepi4-pro |
| Released | 2025 |
| Hardware | |
| Chipset | Allwinner A733 |
| CPU |
2x 2.0GHz Cortex-A76 6x 1.8GHz Cortex-A55 |
| GPU | Imagination BXM-4-64 MC1 |
| Memory | 4/8/12/16 GB LPDDR5 |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
Linux 5.15.147 |
Extended version The most recent supported version from the manufacturer. |
Linux |
| postmarketOS | |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
6.10.0 |
Contributors
Users owning this device
- AppleCross (Notes: OrangePi OS)
Installation
Follow the Installation guide, install to a USB drive (microSD is currently unsupported).
To install to internal storage, such as eMMC or NVMe, install and run pmbootstrap from pmOS on the SBC.
Note that the stock U-Boot that comes preloaded on this device is buggy and can't be used to boot pmOS. See the Alternate Firmware section below for instructions on installing custom firmware.