Xunlong Orange Pi CM5 (xunlong-orangepi-cm5)
Appearance
![]() Orange Pi CM5 Compute Module | |
Manufacturer | Xunlong |
---|---|
Name | Orange Pi CM5 |
Codename | xunlong-orangepi-cm5 |
Released | 2022 |
Type | system on module |
Hardware | |
Chipset | Rockchip RK3588S |
CPU | 4× Cortex-A76 @2.4 GHz + 4× Cortex-A55 @1.8 GHz |
GPU | Arm Mali-G610 MP4 |
Memory | 2/4/8/16 GB LPDDR4/4X |
Architecture | aarch64 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Users owning this device
How to enter flash mode
Installation
Using pmbootstrap
Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select FIXME as the vendor and FIXME as the codename.
To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernel
to flash the kernel - Run
pmbootstrap flasher flash_rootfs