Jump to content

Xunlong Orange Pi Zero 3 (xunlong-orangepi-zero3)

From postmarketOS Wiki
Xunlong Orange Pi Zero 3
Orange Pi Zero 3 board photo
Orange Pi Zero 3 board photo
Manufacturer Xunlong
Name Orange Pi Zero 3
Codename xunlong-orangepi-zero3
Model Orange Pi Zero 3
Released 2023
Type single board computer
Hardware
Chipset Allwinner H618
CPU 4× ARM Cortex-A53 @ 1.5 GHz
GPU Mali-G31 MP2
Storage microSD, 128Mbit SPI flash (zBit 25VQ128ASIG)
Memory 1/1.5/2/4 GB
Architecture aarch64
Software
Original software
The software and version the device was shipped with.
Orange Pi OS
Extended version
The most recent supported version from the manufacturer.
Orange Pi OS
postmarketOS
Category testing
Pre-built images
Whether pre-built images are available from the postmarketOS Installation page.
no
Mainline
Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.
yes
Unixbench score
Unixbench Whetstone/Dhrystone score. See Unixbench.
1385.7
Device package device-xunlong-orangepi-zero3
Kernel package linux-postmarketos-allwinner
Features
USB Networking
After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).
Works
SD card
Also includes other external storage cards.
Works
Multimedia
3D Acceleration
Untested
Audio
Audio playback, microphone, headset and buttons.
Untested
IR TX
Untested
IR RX
Untested
Connectivity
WiFi
Broken
Bluetooth
Broken
Ethernet
Works
Miscellaneous
FDE
Full disk encryption and unlocking with unl0kr.
Broken
USB-A
Whether the full-sized USB-A port works.
Works
USB OTG
USB On-The-Go or USB-C Role switching.
Untested
HDMI/DP
Video and audio output with HDMI or DisplayPort.
Broken
U-Boot
Primary Bootloader
Whether it is possible to replace stock bootloader with U-Boot.
Works
Mainline
Whether latest upstream versions of U-Boot are not broken and it is possible to use them.
Partial
Internal Storage
Whether it is possible to boot from internal storage (e.g. eMMC or UFS).
Untested
SD card
Whether it is possible to boot from SD card.
Works
USB Host
Whether it is possible to boot from a USB storage or connect a keyboard.
Untested
USB Peripheral
Whether it is possible to use device as a peripheral in U-Boot, e.g. for fastboot mode.
Untested
Display
Untested
Keyboard
Untested

Contributors

Users owning this device


Installation

Using pmbootstrap

Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select xunlong as the vendor and orangepi-zero3 as the codename.

To flash the image to the device:

  • Run pmbootstrap install --sdcard=...

Serial console

You can connect a 3.3V UART adapter to the three-pin header on the board; TX, RX and ground pins are labelled.

WiFi / Bluetooth

Requires the out-of-tree unisoc_wifi / uwe5622 driver and firmware. For details see:

See also