Xiaomi Redmi Note 3 (xiaomi-kenzo)

From postmarketOS
Xiaomi Redmi Note 3 Pro
Redmi Note 3 running weston
Redmi Note 3 running weston
Manufacturer Xiaomi
Name Redmi Note 3 Pro
Codename xiaomi-kenzo
Released 2016
Category testing
Pre-built images no
Original software Android
Original version 5.1
Extended version 6.0.1 (MIUI 9)
postmarketOS kernel 3.10.105
Hardware
Chipset Qualcomm Snapdragon 650 (MSM8956)
CPU Hexa-core (4x1.4GHz Cortex-A53 & 2x1.8GHz Cortex-A72)
GPU Adreno 510
Display 1080x1920 IPS
Storage 16/32 GB
Memory 2/3 GB
Architecture AArch64
Type handset
Unixbench Whet/Dhry score 2417.9
Features
USB Networking
Works
Flashing
Works
Touchscreen
Partial
Display
Partial
WiFi
Works
FDE
Partial
Mainline
Battery
Works
3D Acceleration
Audio
Bluetooth
Camera
GPS
Mobile data
Internal storage
SMS
Calls
USB OTG
Partial
NFC
Sensors
Accelerometer
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Built-in DVB
Camera Flash
Keyboard
Touchpad
USB-A
HDMI/DP
Ir TX
Ir RX
Stylus
Memory Card
Haptics
Ethernet
FOSS bootloader


Note Not to be confused with the xiaomi-hennessey, which is based on a MediaTek SoC
Icon WARNING: 16.06.2023

- Takes a long time to boot, UI doesn't work, and screen hangs on the boot animation.

- Over SSH it works, but the screen cannot be switched off

How to install

Fastboot Mode

Hold down Volume Down and Power buttons simultaneously for a few seconds, until Fastboot Mode screen appears.

Installation

First build the image:

$ pmbootstrap init
$ pmbootstrap install

Then in order to flash it put your device in fastboot mode, and plug it in USB. Then do:

$ pmbootstrap flasher flash_rootfs
$ pmbootstrap flasher flash_kernel

To connect to a Wi-Fi network simply run:

$ sudo nmtui

And connect to your prefered wifi network using the terminal UI.

UI options

Nothing works, even console.

Community info

Maintainers

  • None

Old maintainers

  • IdanHoro

Users owning this device

See also