Jump to content

Mobvoi Ticwatch Pro (mobvoi-catfish): Difference between revisions

From postmarketOS Wiki
TipzTeam (talk | contribs)
No edit summary
SoySoy (talk | contribs)
m originalversion type
 
(16 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{Infobox device
{{Infobox device
| manufacturer = Mobvoi
| manufacturer = Mobvoi
| name = CHANGE_ME Ticwatch Pro
| name = Ticwatch Pro
| codename = mobvoi-catfish
| codename = mobvoi-catfish
<!--| image =  
| image = File:Catfish.jpg
| imagecaption = -->
| imagecaption = Stock image provided by Mobvoi
| releaseyear = CHANGE_ME
| releaseyear = 2017
| originalsoftware = Android 8.0.0 (WearOS)
| originalsoftware = Android
| chipset = Qualcomm APQ8009w Snapdragon Wear 2100
| originalversion = 8.0.0 WearOS
| chipset = Qualcomm Snapdragon Wear 2100 (APQ8009w)
| cpu = Quad-core 1.2 GHz Cortex A7
| cpu = Quad-core 1.2 GHz Cortex A7
| gpu = Adreno 304
| gpu = Adreno 304
Line 14: Line 15:
| memory = 512MB
| memory = 512MB
| architecture = armv7
| architecture = armv7
| type = watch
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) -->
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) -->
| status_usbnet = N
| status_usbnet = Y
| status_flashing = Y
| status_flashing = Y
| status_touch =  
| status_touch =  
Line 28: Line 30:
| status_audio =  
| status_audio =  
| status_bluetooth =  
| status_bluetooth =  
| status_camera =  
| status_camera = -
| status_gps =  
| status_gps =  
| status_mobiledata =  
| status_mobiledata = -
| status_sms =  
| status_sms = -
| status_calls =
| status_calls = -
| status = kernel compiles, able to flash, doesn't boot
| status_otg =
| booting = no
| status = usb networking is now working
| status_otg =  
| booting = yes
-->
}}
}}


Line 53: Line 54:
== Installation ==
== Installation ==


== Boot log ==
== Current status ==
<source lang="bash">
When the image created with the downstream kernel is flashed onto the device works, connects to USB networking fine but no display (yet).
[  376.965966] EXT4-fs (mmcblk0p22): VFS: Can't find ext4 filesystem
[  376.966400] EXT4-fs (mmcblk0p22): VFS: Can't find ext4 filesystem
[  377.027685] audit: type=1400 audit(1597751296.801:350): avc:  denied  { write } for  pid=283 comm="recovery" path="/data/media/0/TWRP/.twrps" dev="mmcblk0p35" ino=55466 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
[  377.028064] audit: type=1400 audit(1597751296.801:351): avc:  denied  { relabelfrom } for  pid=283 comm="recovery" name=".twrps" dev="mmcblk0p35" ino=55466 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
[  377.028123] audit: type=1400 audit(1597751296.801:352): avc:  denied  { relabelto } for  pid=283 comm="recovery" name=".twrps" dev="mmcblk0p35" ino=55466 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
[  377.028231] audit: type=1400 audit(1597751296.801:353): avc:  denied  { setattr } for  pid=283 comm="recovery" name=".twrps" dev="mmcblk0p35" ino=55466 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
[  377.103900] init: Clear action queue and start shutdown trigger
[  377.104031] init: processing action (shutdown_done) from (<Builtin Action>:0)
[  377.104073] init: Reboot start, reason: reboot,, rebootTarget:
[  377.104203] init: android::WriteStringToFile open failed: No such file or directory
[  377.104237] init: Shutdown timeout: 0 ms
[  377.104368] init: Sending signal 9 to service 'ueventd' (pid 277) process group...
[  377.115283] init: Successfully killed process cgroup uid 0 pid 277 in 10ms
[  377.115554] init: Sending signal 9 to service 'recovery' (pid 283) process group...
[  377.322082] init: Failed to kill process cgroup uid 0 pid 283 in 206ms, 1 processes remain
[  377.322197] init: Service 'ueventd' (pid 277) killed by signal 9
[  377.322344] init: Service 'recovery' (pid 283) exited with status 0
[  377.322382] init: Sending signal 9 to service 'recovery' (pid 283) process group...
[  377.350100] mtp_release
[  377.350233] ------------[ cut here ]------------
[  377.350256] WARNING: CPU: 0 PID: 315 at drivers/iommu/msm_dma_iommu_mapping.c:374 msm_dma_buf_freed+0xbc/0xec()
[  377.350267] msm_dma_buf_freed: DMA Buffer dbc90380 being destroyed with outstanding iommu mappins!
[  377.350275] Modules linked in:
[  377.350292] CPU: 0 PID: 315 Comm: recovery Not tainted 3.18.24-g2e729d60764d-dirty #1
[  377.350322] [<c001483c>] (unwind_backtrace) from [<c0011bc0>] (show_stack+0x10/0x14)
[  377.350340] [<c0011bc0>] (show_stack) from [<c0949a5c>] (dump_stack+0x70/0xbc)
[  377.350359] [<c0949a5c>] (dump_stack) from [<c002b5e4>] (warn_slowpath_common+0x64/0x88)
[  377.350375] [<c002b5e4>] (warn_slowpath_common) from [<c002b634>] (warn_slowpath_fmt+0x2c/0x3c)
[  377.350391] [<c002b634>] (warn_slowpath_fmt) from [<c06e535c>] (msm_dma_buf_freed+0xbc/0xec)
[  377.350411] [<c06e535c>] (msm_dma_buf_freed) from [<c0679f48>] (_ion_buffer_destroy+0x14/0x5c)
[  377.350429] [<c0679f48>] (_ion_buffer_destroy) from [<c0679fc0>] (ion_buffer_put+0x30/0x40)
[  377.350447] [<c0679fc0>] (ion_buffer_put) from [<c0420854>] (dma_buf_release+0x54/0x160)
[  377.350466] [<c0420854>] (dma_buf_release) from [<c01275bc>] (__fput+0xd4/0x1b0)
[  377.350483] [<c01275bc>] (__fput) from [<c0041c2c>] (task_work_run+0xb4/0xcc)
[  377.350500] [<c0041c2c>] (task_work_run) from [<c002dab4>] (do_exit+0x41c/0x90c)
[  377.350515] [<c002dab4>] (do_exit) from [<c002e01c>] (do_group_exit+0x4c/0xb0)
[  377.350532] [<c002e01c>] (do_group_exit) from [<c0037404>] (get_signal+0x52c/0x59c)
[  377.350549] [<c0037404>] (get_signal) from [<c00110fc>] (do_signal+0x84/0x36c)
[  377.350567] [<c00110fc>] (do_signal) from [<c001152c>] (do_work_pending+0x54/0xb4)
[  377.350584] [<c001152c>] (do_work_pending) from [<c000e168>] (work_pending+0xc/0x20)
[  377.350594] ---[ end trace b6219cd9f9e74599 ]---
[  377.354098] init: Successfully killed process cgroup uid 0 pid 283 in 31ms
[  377.354752] init: Untracked pid 312 exited with status 0
[  377.354870] init: Untracked pid 315 killed by signal 9
[  377.354939] init: Untracked pid 326 killed by signal 1
[  377.355058] init: Untracked pid 346 exited with status 0
[  377.355171] init: Untracked pid 347 exited with status 0
[  377.355276] init: vold not running, skipping vold shutdown
[  377.355314] init: Sending signal 9 to service 'adbd' (pid 316) process group...
[  377.360909] init: Successfully killed process cgroup uid 0 pid 316 in 5ms
[  377.380222] init: umounted /dev/block/mmcblk0p35:/sdcard opts rw,seclabel,relatime,stripe=2,data=ordered
[  377.483143] init: umounted /dev/block/mmcblk0p35:/data opts rw,seclabel,relatime,stripe=2,data=ordered
[  377.525558] init: umounted /dev/block/mmcblk0p24:/cache opts rw,seclabel,relatime,data=ordered
[  377.726193] init: powerctl_shutdown_time_ms:622:0
[  377.726229] init: Reboot ending, jumping to kernel
[  377.731521] [SSPBBD]: bcm_spi_shutdown ++
[  377.731539] [SSPBBD]: bcm_spi_shutdown **
[  377.731686] [SSPBBD]: bcm_spi_shutdown --
[  377.741167] nanohub: 267 [mode] apCmd:0, Enter Poweroff Mode
[  377.748476] mdss_fb_release_all: try to close unopened fb 0! from pid:1 name:init
[  377.748802] [DRV2605]shutting down, no change mode.
[  377.749562] reboot: Restarting system with command ''
[  377.749585] Going down for restart now
[  377.750529] Calling SCM to disable SPMI PMIC arbiter
</source>


== See also ==
== See also ==
* [https://android.googlesource.com/kernel/msm/+/refs/heads/android-msm-catshark-3.18-pie-wear-dr Downstream Kernel]

Latest revision as of 16:47, 10 August 2023

Mobvoi Ticwatch Pro
Stock image provided by Mobvoi
Stock image provided by Mobvoi
Manufacturer Mobvoi
Name Ticwatch Pro
Codename mobvoi-catfish
Released 2017
Type watch
Hardware
Chipset Qualcomm Snapdragon Wear 2100 (APQ8009w)
CPU Quad-core 1.2 GHz Cortex A7
GPU Adreno 304
Display 400x400 AMOLED + FSTN
Storage 4GB
Memory 512MB
Architecture armv7
Software
Original software Android
Original version 8.0.0 WearOS
postmarketOS
Category testing
Pre-built images no
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
No data
Touchscreen
No data
Multimedia
3D Acceleration
No data
Audio
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • TipzTeam

Maintainer(s)

  • TipzTeam

Users owning this device


How to enter flash mode

Hold down Power + Action while booting to enter Flash Mode.

Installation

Current status

When the image created with the downstream kernel is flashed onto the device works, connects to USB networking fine but no display (yet).

See also