Jump to content

BQ Aquaris X5 (bq-paella): Difference between revisions

From postmarketOS Wiki
Lazzardo (talk | contribs)
No edit summary
Lazzardo (talk | contribs)
No edit summary
Line 2: Line 2:
| manufacturer = BQ
| manufacturer = BQ
| name = Aquaris X5
| name = Aquaris X5
| codename = bq-picmt
| codename = bq-picmt, bq-paella
| image = File:bq-picmt.jpg|thumb|133px
| image = File:bq-picmt.jpg|thumb|133px
| imagecaption = BQ Aquaris X5 Cyanogen Edition running weston on postmarketOS
| imagecaption = BQ Aquaris X5 Cyanogen Edition running weston on postmarketOS
Line 70: Line 70:


== Status ==
== Status ==
Currently work is separated based on firmware installed, if you installed the Cyanogen Edition firmware will be referred as bq-paella, if you installed the BQ Android firmware it will be referred as bq-picmt. So here is a summary for both:
'''bq-picmt:''' runs on downstream kernel


Works:
Works:
Line 82: Line 85:


Modem doesn't work, in dmesg I get DATA5_CNTL error relative to no such device
Modem doesn't work, in dmesg I get DATA5_CNTL error relative to no such device
'''bq-paella:''' runs on mainline kernel
Works:
USB Network,
WiFi,
Bluetooth


== See also ==
== See also ==

Revision as of 07:33, 15 April 2020

BQ Aquaris X5
BQ Aquaris X5 Cyanogen Edition running weston on postmarketOS
BQ Aquaris X5 Cyanogen Edition running weston on postmarketOS
Manufacturer BQ
Name Aquaris X5
Codename bq-picmt, bq-paella
Released 2015
Hardware
Chipset Qualcomm MSM8916T Snapdragon 412
CPU Quad-core 1.4 GHz Cortex-A53
GPU Adreno 306
Display 720 x 1280 (IPS LCD capacitive touchscreen, 16M colors)
Storage 16GB / 32GB
Memory 2GB / 3GB
Architecture armv7
Software
Original software Android 7.1.2, CM 13.1
postmarketOS
Category testing
Pre-built images no
Features
Flashing
Partial
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
Works
Touchscreen
Partial
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Works
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

Maintainer(s)

Users owning this device


How to enter flash mode

By now the way I flashed the device and having it working was following Installation from recovery mode guide and using the adb sideload method

Installation

Status

Currently work is separated based on firmware installed, if you installed the Cyanogen Edition firmware will be referred as bq-paella, if you installed the BQ Android firmware it will be referred as bq-picmt. So here is a summary for both:

bq-picmt: runs on downstream kernel

Works: USB Network, WiFi, Display, weston, weston-calibrator

Buggy: ts_calibrate: to make screen get touches I incrementally have to touch screen with one finger and then with that finger on screen touch the crosshair, then for the second two fingers and crosshair, for the third three fingers and crosshair...don't know why but it started happening when I replaced my broken screen with a new one, if someone has this device with original screen can check if the same issue is present or not

Modem doesn't work, in dmesg I get DATA5_CNTL error relative to no such device

bq-paella: runs on mainline kernel

Works: USB Network, WiFi, Bluetooth


See also

Initial merge request [1]