Jump to content

Asus Transformer Pad (asus-tf103c): Difference between revisions

From postmarketOS Wiki
Eloy (talk | contribs)
add touch controller
Unah (talk | contribs)
m Fix stylization of "Xfce"
Line 53: Line 53:


== Mainline kernel ==
== Mainline kernel ==
Fedora+XFCE has been tested and boots up fine, with the use of [https://github.com/me176c-dev/me176c-boot me176c-boot] and a USB-OTG hub. The Arch Linux liveiso disabled USB after roughly a minute.
Fedora+Xfce has been tested and boots up fine, with the use of [https://github.com/me176c-dev/me176c-boot me176c-boot] and a USB-OTG hub. The Arch Linux liveiso disabled USB after roughly a minute.


=== Hardware status ===
=== Hardware status ===
Line 67: Line 67:
| Y
| Y
|Panel
|Panel
|Panel works, unknown type. In XFCE the highest pixel row contains the lowest pixel row with some horizontal offset, cause is unknown.
|Panel works, unknown type. In Xfce the highest pixel row contains the lowest pixel row with some horizontal offset, cause is unknown.
|-
|-
| N
| N

Revision as of 02:53, 10 January 2021

Note The device uses K010 as the typenumber
This device is marked as not booting.
Asus Transformer Pad TF103C
Manufacturer Asus
Name Transformer Pad TF103C
Codename tf103c
Released 2014
Hardware
Chipset Intel Atom Z3745
CPU Quad-core 1.86 GHz
GPU Intel Gen 7 (Ivy Bridge)
Display 800 x 1280
Storage 8/16 GiB
Memory 1 GiB
Architecture x86_64
Software
Original software Android 4.4.2 on Linux 3.10.20
postmarketOS
Category testing
Pre-built images no


Contributors

Installation

Update to Android 5.0

To get UEFI for booting postmarketOS, it is required to update to Android 5.0. First, make sure the tablet is fully charged.

If the build number is lower than WW-2.2.33.144, download UL-K010-WW-2_2_33_144-user.zip and rename it to (or in case Asus fixed it, make sure the filename is) UL-K010-WW-2.2.33.144-user.zip. Put the file in the root of the internal storage. A notification should appear which will start the update process. Make sure to charge the tablet before updating.

If the build number is equal to WW-2.2.33.144, download the Android 5.0 upgrade file UL-K010-WW-12_10_5_11-user.zip, unzip it and put the zip inside in the root of the internal storage. A notification should appear which will start the update process.

Install bootloader

Install postmarketOS

TODO

Mainline kernel

Fedora+Xfce has been tested and boots up fine, with the use of me176c-boot and a USB-OTG hub. The Arch Linux liveiso disabled USB after roughly a minute.

Hardware status

Status Hardware Info
Y Booting
Y Panel Panel works, unknown type. In Xfce the highest pixel row contains the lowest pixel row with some horizontal offset, cause is unknown.
N Touchscreen Atmel mXT1664T2-C2U, there is a driver in mainline but untested
Y USB USB-OTG through charging port works, secondary USB-A port in dock doesn't work because the entire dock does not work yet.
Y SD cards MicroSD cards are recognized and can be mounted
Y Internal memory Can be accessed
N GPS
N WiFi
N Bluetooth
N GPIO keys
N Vibro
N Dock Keyboard
N Battery/Charger
N PMIC
N Sound
N Voice processor
N Thermal sensor
N Orientation sensors
N Light sensor
N Front camera
N Rear camera
Y Intel Integrated Graphics