Xiaomi Mi 5s Plus (xiaomi-natrium): Difference between revisions
Appearance
Add "What's not working" section |
Add "Current Progress" section |
||
Line 60: | Line 60: | ||
* Sharp panel varient, but JDI panel varient works good | * Sharp panel varient, but JDI panel varient works good | ||
* WiFi is unstable and the signal is poor (in some cases) | * WiFi is unstable and the signal is poor (in some cases) | ||
== Current Progress == | |||
=== IR === | |||
The IR led can be lighted up with <code>ir-ctl</code> tool. Currently not test with real IR receivers. | |||
* [https://gitlab.com/AlecJY/msm8996-mainline-linux/-/tree/natrium-ir kernel] | |||
=== Sharp panel varient === | |||
It seems that there is no obvious problem. If you own a Mi 5s Plus with a Sharp panel, you can try this version. | |||
* [https://gitlab.com/AlecJY/pmaports/-/tree/natrium-sharp-panel pmaports] | |||
* [https://gitlab.com/AlecJY/msm8996-mainline-linux/-/tree/natrium-sharp-panel kernel] | |||
== See also == | == See also == | ||
* {{MR|3128|pmaports}} Initial merge request | * {{MR|3128|pmaports}} Initial merge request |
Revision as of 02:59, 7 June 2022
![]() Xiaomi Mi 5s Plus running Plasma Mobile | |
Manufacturer | Xiaomi |
---|---|
Name | Mi 5s Plus |
Codename | xiaomi-natrium |
Released | 2016 |
Hardware | |
Chipset | Qualcomm MSM8996Pro Snapdragon 821 |
CPU | 2x2.35 GHz Kryo & 2x2.2 GHz Kryo |
GPU | Adreno 530 |
Display | 1080x1920 IPS LCD |
Storage | UFS 2.0 64/128GB |
Memory | 4/6 GB |
Architecture | aarch64 |
Software | |
Original software | Android 6.0 (Marshmallow), MIUI 8.2 - Upgradeable to Android 8.0 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
Partial |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Works |
Audio |
Partial |
Camera |
Broken |
Camera Flash |
No data |
IR TX |
Broken |
Connectivity | |
WiFi |
Partial |
Bluetooth |
Works |
GPS |
No data |
NFC |
Works |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
Works |
USB OTG |
Works |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
Broken |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
This device is based on the Snapdragon 821. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
- AlecJY
Users owning this device
- AlecJY
- Crystalast-29 (Notes: sharp panel is working on "natrium-sharp-panel" branch)
How to enter flash mode
Power off the device, then press and hold Power + Volume Down together for a few seconds.
Installation
Follow the installation guide to build and install.
What's not working
- Cellular
- Camera
- GPS
- Sensors
- IR
- Sharp panel varient, but JDI panel varient works good
- WiFi is unstable and the signal is poor (in some cases)
Current Progress
IR
The IR led can be lighted up with ir-ctl
tool. Currently not test with real IR receivers.
Sharp panel varient
It seems that there is no obvious problem. If you own a Mi 5s Plus with a Sharp panel, you can try this version.
See also
- pmaports!3128 Initial merge request