Jump to content

ODROID XU4 (odroid-xu4): Difference between revisions

From postmarketOS Wiki
Don't set category to community as this device is in testing
Jenneron (talk | contribs)
GPU note
Line 75: Line 75:


3. The Odroid XU4 should boot up and become accessible over SSH.
3. The Odroid XU4 should boot up and become accessible over SSH.
== GPU ==
See [[3D_Acceleration#Mali_T628]].


== See also ==
== See also ==

Revision as of 20:01, 16 June 2022

ODROID XU4
ODROID XU4
ODROID XU4
Manufacturer ODROID
Name XU4
Codename odroid-xu4
Released 2015
Hardware
Chipset Samsung Exynos 5422
CPU 4x 1.9 GHz A15 & 4x 1.3 GHz A7
GPU Mali-T628
Display None
Storage eMMC card or microSD
Memory 2GB LPDDR3
Architecture armv7
Software
Original software Ubuntu 20.04 LTS
postmarketOS
Category testing
Pre-built images no
Mainline yes
Features
USB Networking
Works
Internal storage
No data
SD card
No data
Multimedia
3D Acceleration
No data
Audio
No data
Camera Flash
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

Maintainer(s)

Users owning this device


Installation

1. Use pmbootstrap to create a bootable SD card:

 pmbootstrap init  # pick 'odroid' as manufacturer, 'xu4' as device and 'none' as UI.
 pmbootstrap install --sdcard=/dev/sdX

You must install the nonfree firmware package for this device to get it booting. It contains early bootloaders and trustzone firmware. The early bootloaders initialise the hardware and then boots u-boot.

2. Insert SD card into the Odroid XU4, plug in the Ethernet cable and turn it on.

3. The Odroid XU4 should boot up and become accessible over SSH.

GPU

See 3D_Acceleration#Mali_T628.

See also