Jump to content

Google Nexus 6 (motorola-shamu): Difference between revisions

From postmarketOS Wiki
m Added tested features
m Battery only partially works, reports multiple (different) charge statuses
Line 22: Line 22:
| status_fde =  
| status_fde =  
| status_mainline =  
| status_mainline =  
| status_battery = Y
| status_battery = P
| status_3d =  
| status_3d =  
| status_accel =  
| status_accel =  

Revision as of 22:35, 13 September 2022

Note This device is still running on armhf, although the processor supports armv7. If you own it, change it and test it that way.
Google (Motorola) Nexus 6
Manufacturer Google (Motorola)
Name Nexus 6
Codename motorola-shamu
Released 2014
Hardware
Chipset Qualcomm MSM8084 Snapdragon 805
CPU Quad-core 2.7 GHz Krait 450
GPU Adreno 420
Display 1440x2560 AMOLED
Storage 32/64 GB
Memory 3 GB
Architecture armv7
Software
Original software Android 5.0 (upgradable to Android 7.1.1)
postmarketOS
Category testing
Pre-built images no
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
Partial
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
No data
Audio
Broken
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
Broken
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

Device owners

  • Artillect (Notes: Running postmarketOS with xfce4)


How to enter flash mode

With the device powered off, hold Volume Down while booting.

Additional info

The screen brightness can be adjusted by writing a value from 0 to 255 to /sys/devices/fd900000.qcom,mdss_mdp/qcom,mdss_fb_primary.164/leds/lcd-backlight/brightness.

LEDs

The green charging LED can be set by writing a value from 0 to 40 to /sys/devices/leds-qpnp-10/leds/charging/brightness. General purpose LEDs can be set by writing a value from 0 to 20 to the devices below, although there is no observable difference in brightness from 1 to 20.

  • Red: /sys/devices/leds-qpnp-11/leds/red/brightness
  • Green: /sys/devices/leds-qpnp-12/leds/green/brightness
  • Blue: /sys/devices/leds-qpnp-13/leds/blue/brightness

Links