Jump to content

JingPad A1 (jingpad-a1): Difference between revisions

From postmarketOS Wiki
Exkc (talk | contribs)
No edit summary
SoySoy (talk | contribs)
m Seperate software from version and remove n-android
Line 6: Line 6:
| imagecaption = JingPad A1
| imagecaption = JingPad A1
| releaseyear = 2021
| releaseyear = 2021
| originalsoftware = JingOS (Linux 4.14)
| originalsoftware = JingOS
| originalversion = Linux 4.14
| chipset = Unisoc Tiger T7510
| chipset = Unisoc Tiger T7510
| cpu = 2x2.0 GHz ARM Cortex-A75, 6x1.8 GHz ARM Cortex-A55
| cpu = 2x2.0 GHz ARM Cortex-A75, 6x1.8 GHz ARM Cortex-A55
Line 14: Line 15:
| memory = 8 GB
| memory = 8 GB
| architecture = aarch64
| architecture = aarch64
| n-android = ✔
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) -->
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) -->
| status_usbnet = <!-- USB networking does work? then put Y here and delete this comment -->
| status_usbnet = <!-- USB networking does work? then put Y here and delete this comment -->

Revision as of 11:27, 26 December 2022

This device is marked as not booting.
Jingling JingPad A1
JingPad A1
JingPad A1
Manufacturer Jingling
Name JingPad A1
Codename jingpad-a1
Released 2021
Hardware
Chipset Unisoc Tiger T7510
CPU 2x2.0 GHz ARM Cortex-A75, 6x1.8 GHz ARM Cortex-A55
GPU PowerVR GM 9446
Display 2368x1728 AMOLED
Storage 128 GB / 256 GB
Memory 8 GB
Architecture aarch64
Software
Original software JingOS
Original version Linux 4.14
postmarketOS
Category testing
Pre-built images no
Unixbench Whet/Dhry score 6620.0


Contributors

  • R
  • Clevrpwn

Users owning this device

  • Clevrpwn (Notes: For pmOS development)
  • Shiishii (Notes: Daily driver Tab Ubuntu Touch)


How to enter flash mode

Recovery

  • Turn off your device;
  • Press Power button and after 1 second press also “Volume Down”;
  • Hold both till JingPad logo appears;
  • After the JingPad logo appears, release “Power” & “Volume-”
  • Welcome to Recovery!

Fastboot Mode

  • Turn off your device
  • Boot JingPad A1 into recovery mode;
  • Choose “Reboot into bootloader.”
  • After booting into bootloader mode, connect your device to a Linux desktop using the original USB Cable;
  • Open Terminal in the SDK location, check your device is connected with:
 sudo ./fastboot devices

Installation

See also