Nokia 8110 4G (nokia-argon): Difference between revisions
m n-android |
m Seperate software from version and remove n-android |
||
Line 5: | Line 5: | ||
| image = File:Nokia-argon-xfce.jpg | | image = File:Nokia-argon-xfce.jpg | ||
| releaseyear = 2018 | | releaseyear = 2018 | ||
| originalsoftware = KaiOS 2.5 | | originalsoftware = KaiOS | ||
| originalversion = 2.5 | |||
| chipset = Qualcomm Snapdragon 205 (MSM8905) | | chipset = Qualcomm Snapdragon 205 (MSM8905) | ||
| cpu = 2x 1.1 GHz Cortex-A7 | | cpu = 2x 1.1 GHz Cortex-A7 | ||
Line 13: | Line 14: | ||
| memory = 512 MB | | memory = 512 MB | ||
| architecture = armv7 | | architecture = armv7 | ||
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --> | <!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --> | ||
| status_usbnet = Y | | status_usbnet = Y |
Revision as of 11:57, 26 December 2022
![]() | |
Manufacturer | Nokia |
---|---|
Name | 8110 4G |
Codename | nokia-argon |
Released | 2018 |
Hardware | |
Chipset | Qualcomm Snapdragon 205 (MSM8905) |
CPU | 2x 1.1 GHz Cortex-A7 |
GPU | Adreno 304 |
Display | 240x320 TFT |
Storage | 4 GB |
Memory | 512 MB |
Architecture | armv7 |
Software | |
Original software | KaiOS |
Original version | 2.5 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
Partial |
Screen |
Works |
Multimedia | |
3D Acceleration |
No data |
Audio |
Broken |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
Works |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
Broken |
SMS |
Broken |
Mobile data |
Broken |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
Users owning this device
- Aa13q
- Adomerle (Notes: On pmOS)
- Affenull2345
- Belkaliz (Notes: WIP)
- FuchsPunk
- Saper (Notes: 5 pieces)
- Socksinspace (Notes: it's...something)
Mainline
The mainline fork at https://gitlab.com/bananian/msm8909-mainline is used. It is based on the msm8909 and msm8916-mainline trees and also has support for the Nokia 8000 4G.
Display
The display is connected via SPI and works with the tinydrm panel-mipi-dbi driver. It is usable even without GPU or MDP3 support. MDP3 seems to be unused on this device because it isn't connected to the display in any way. Backlight control also works.
Modem
Modem is broken, rmtfs needs a patch: https://github.com/andersson/rmtfs/pull/17
Battery
Uses the incomplete voltage mode BMS driver, same problem as Wileyfox_Swift_(wileyfox-crackling)#Battery_and_charging.
Flashing
EDL mode can be entered by pressing the Up and Down keys while plugging in or turning on the phone. Use the loader from https://edl.bananahackers.net and the edl.py fork at https://github.com/andybalholm/edl.
Partitions can also be written directly using dd on rooted devices.
Installation
Install lk2nd from https://gitlab.com/bananian/lk2nd (prebuilt artifacts available) into the boot partition. Now you can use pmbootstrap to flash everything else via fastboot.