Fairphone 2 (fairphone-fp2): Difference between revisions
Appearance
PureTryOut (talk | contribs) No edit summary |
MartijnBraam (talk | contribs) No edit summary |
||
Line 2: | Line 2: | ||
| manufacturer = Fairphone | | manufacturer = Fairphone | ||
| name = Fairphone 2 | | name = Fairphone 2 | ||
| codename = fp2 | | codename = fairphone-fp2 | ||
| image = File:Fairphone 2.jpg | | image = File:Fairphone 2.jpg | ||
| imagecaption = Fairphone 2 | | imagecaption = Fairphone 2 |
Revision as of 08:01, 12 September 2018
WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it. The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly. |
![]() Fairphone 2 | |
Manufacturer | Fairphone |
---|---|
Name | Fairphone 2 |
Codename | fairphone-fp2 |
Released | 2015 |
Hardware | |
Chipset | Qualcomm MSM8974AB-AB Snapdragon 801 |
CPU | Quad-core 2.26 GHz |
GPU | Adreno 330 |
Display | 1080x1920 IPS |
Storage | 32 GB |
Memory | 2 GB |
Architecture | armhf |
Software | |
Original software | Android 5.1 on Linux 3.4 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | partial |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- Luca Weiss (z3ntu)
Maintainer(s)
- Luca Weiss (z3ntu)
How to enter flash mode
Hold vol-down while booting the device. The splash screen doesn't indicate, that the phone is in fastboot mode, but you can test it by running "fastboot devices" on a PC that's connected via USB to the phone.
Installation
A more-or-less guide is available in the Fairphone Forum.
Older bootloaders do not support flashing images generated with the "img2simg" tool. It needs the patch "app: aboot: Add support for CHUNK_FILL type for sparse image" to work. This patch is included since the 18.01.1 release from Fairphone. See the Fairphone Forum where @z3ntu also provides instructions on how to patch the bootloader.
Installation procedure is the same as with most other devices and isn't special for this phone.