Xiaomi Mi 2 (xiaomi-aries): Difference between revisions
Appearance
Add Xiaomi Mi 2 |
fix autocorrection |
||
Line 13: | Line 13: | ||
| display = 1280x720 IPS <!-- e.g. 480x800 AMOLED --> | | display = 1280x720 IPS <!-- e.g. 480x800 AMOLED --> | ||
| memory = 2GB <!-- e.g. 576 MB --> | | memory = 2GB <!-- e.g. 576 MB --> | ||
| architecture = | | architecture = armhf <!-- One of these: armhf, aarch64, x86, x86_64 --> | ||
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --> | <!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --> | ||
| status_usbnet = Y<!-- USB networking does work? then put Y here and delete this comment --> | | status_usbnet = Y<!-- USB networking does work? then put Y here and delete this comment --> |
Revision as of 15:33, 21 January 2019
WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it. The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly. |
![]() Xiaomi Mi 2 | |
Manufacturer | Xiaomi |
---|---|
Name | Mi 2 |
Codename | xiaomi-aries |
Released | 2012 |
Hardware | |
Chipset | Qualcomm Snapdragon S4 APQ8064 |
CPU | Quad-Core Krait @ 1.5 GHz |
GPU | Adreno 320 |
Display | 1280x720 IPS |
Storage | 16GB / 32GB |
Memory | 2GB |
Architecture | armhf |
Software | |
Original software | MIUI V4 (Android 4.1 Jelly Bean) |
postmarketOS | |
Category | testing |
Pre-built images | no |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Broken |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- Lwrless
Maintainer(s)
How to enter flash mode
Volume Down
+ Power
, it will look like this: