Samsung Galaxy Ace 3 LTE (samsung-loganrelte): Difference between revisions
Appearance
Add link to SSH issue |
m SSH over USB notes, MAC randomization notes, and screen notes |
||
Line 56: | Line 56: | ||
When booting normally, the screen doesn't refresh and is stuck on the Samsung logo, | When booting normally, the screen doesn't refresh and is stuck on the Samsung logo, | ||
when booting from the charging screen (shutting down and connecting a charger), the screen refreshes normally and shows the pmOS splash screen. | when booting from the charging screen (shutting down and connecting a charger), the screen refreshes normally and shows the pmOS splash screen. | ||
SSH in other UIs | SSH in other UIs and the screen when booting from the charging screen works since {{MR|5975|pmaports}}. Note: The device won't generate a random MAC address. | ||
== How to enter flash mode == | == How to enter flash mode == |
Revision as of 14:35, 4 January 2025
Note: Not to be confused with the non-LTE model, which features a Broadcom SoC! (If you have a letter after the model number, you have the LTE model.) |
![]() | |
Manufacturer | Samsung |
---|---|
Name | Galaxy Ace 3 LTE |
Codename | samsung-loganrelte |
Released | 2013 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon 400 (MSM8930) |
CPU | Dual-core 1.2 GHz Qualcomm Krait |
GPU | Adreno 305 |
Display | 480 x 800 (TFT LCD, 4.0") |
Storage | 8 GB |
Memory | 1 GB |
Architecture | armv7 |
Software | |
Original software | Android |
Original version | 4.2.2 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
postmarketOS kernel | 3.4.113 |
Unixbench Whet/Dhry score | 457.2 |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
Works |
Battery |
Works |
Screen |
Partial |
Touchscreen |
Partial |
Multimedia | |
Audio |
Broken |
Camera Flash |
No data |
Connectivity | |
WiFi |
Broken |
NFC |
No data |
Miscellaneous | |
HDMI/DP |
No data |
Sensors | |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
Maintainer(s)
Users owning this device
- Segfault
- Ungeskriptet (Notes: Experimental lk2nd working)
- User0 (Notes: booted mainline, working on enabling more hardware)
Additional notes
When booting normally, the screen doesn't refresh and is stuck on the Samsung logo, when booting from the charging screen (shutting down and connecting a charger), the screen refreshes normally and shows the pmOS splash screen. SSH in other UIs and the screen when booting from the charging screen works since pmaports!5975. Note: The device won't generate a random MAC address.
How to enter flash mode
- Download mode: While the device is off hold , and to boot it into download mode, afterwards confirm the operation by pressing .
- Recovery mode: While the device is off hold , and to boot it into recovery mode.
Installation
pmbootstrap init # Select samsung-loganrelte, select "none" as UI pmbootstrap build linux-samsung-loganrelte pmbootstrap build device-samsung-loganrelte pmbootstrap install --sdcard=/dev/sdX # doesn't boot from internal storage pmbootstrap flasher flash_kernel
See also
- Wikipedia page for device
- pmaports!5973 Initial merge request