Jump to content

ASUS Eee Pad Transformer (asus-tf101): Difference between revisions

From postmarketOS Wiki
No edit summary
IdanHoro (talk | contribs)
m --no-fde removed (deprecated)
Line 48: Line 48:
You have to flash a recovery like TWRP before doing this.
You have to flash a recovery like TWRP before doing this.


# <pre>./pmbootstrap.py install --no-fde</pre>
# <pre>./pmbootstrap.py install</pre>
# <pre>./pmbootstrap.py export</pre>
# <pre>./pmbootstrap.py export</pre>
# Reboot the device in recovery
# Reboot the device in recovery

Revision as of 18:21, 5 July 2019

Warning WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it.
The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly.
ASUS Eee Pad Transformer
ASUS Eee Pad Transformer
ASUS Eee Pad Transformer
Manufacturer ASUS
Name Eee Pad Transformer
Codename asus-tf101
Released 2011
Hardware
Chipset Nvidia Tegra 2 T20
CPU Dual-core 1 GHz
GPU ULP GeForce
Display 1280x800 IPS
Storage 16/32 GB
Memory 1 GB
Architecture armhf
Software
Original software Android 3.0 on Linux 2.6.36
postmarketOS
Category testing
Pre-built images no
Features
Flashing
No data
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • CmdrWgls
  • rrooij
  • LongnoseRob
  • blacksoil
  • Everyone on IRC

Installation

Note We could streamline this a lot with your help.

You have to flash a recovery like TWRP before doing this.

  1. ./pmbootstrap.py install
  2. ./pmbootstrap.py export
  3. Reboot the device in recovery
  4. adb push /tmp/postmarketOS-export/blob-asus-tf101 /cache
  5. adb push /tmp/postmarketOS-export/asus-tf101.img /cache

The following should be executed within adb shell:

  1. adb shell
  2. dd if=/cache/blob-asus-tf101 of=/dev/block/mmcblk0p4
  3. dd if=/cache/asus-tf101.img of=/dev/block/mmcblk0p1

TODO

  • Look to get mainline working with this DTS file.
  • The interface for this dts should probably be this

Photos

Boot log:

Links