HTC One M8 (htc-m8)
Appearance
WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it. The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly. |
![]() HTC One M8 | |
Manufacturer | HTC |
---|---|
Name | One M8 |
Codename | m8 |
Released | 2014 |
Hardware | |
Chipset | Qualcomm Snapdragon 801 |
CPU | 2.45 GHz quad-core |
GPU | Adreno 330 |
Display | 1080p |
Storage | 16 or 32 GB |
Memory | 2 GB LPDDR3 |
Architecture | armhf |
Software | |
Original software | Android |
postmarketOS | |
Category | testing |
Pre-built images | no |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- fooforever
Maintainer(s)
What works
Kernel compiles
Kernel boots
USB Networking
What does not work
Device Tree image is not generated by pmbootstarp properly. Copying one from a LineageOS boot image into the initramfs then recompiling works.
How to enter flash mode
Hold Power and Vol down while booting
Select fastboot
Installation
Can't flash rootfs from fastboot, must be installed with flashable zip via recovery
See also
Github repo: [1]