Jump to content

Wiko Lenny 3 (wiko-lenny3)

From postmarketOS Wiki
Revision as of 11:52, 22 December 2020 by StandaSK (talk | contribs) (Fix package links)
Note This device is still running on armhf, although the processor supports armv7. If you own it, change it and test it that way.
Wiko Lenny 3
Wiko Lenny 3
Wiko Lenny 3
Manufacturer Wiko
Name Lenny 3
Codename wiko-lenny3
Released 2016
Hardware
Chipset MediaTek MT6580M
CPU Quad-core 1.3 GHz Cortex-A7
GPU Mali-400 MP2
Display 720x1280
Storage 16 GB
Memory 1 GB
Architecture armv7
Software
Original software Android 6.0.1 (Marshmallow)
postmarketOS
Category testing
Pre-built images no
Features
Flashing
Partial
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

Maintainer(s)

Device owners


What works

  • Kernel compilation
  • Flash Kernel (SP Flash Tool required)
  • Flash Rootfs (SP Flash Tool required)
  • Initramfs boot
  • USB Network
  • Framebuffer graphics (Splash screens)
  • SSH Connectivity
  • Weston on framebuffer
  • Xwayland
  • Touchscreen

What does not work

  • Wifi
  • Audio playback
  • Everything else

How to enter flash mode

  • Start SP Flash Tool
  • Select the MT6580 scatter file
  • Check the partition to flash
  • Specify the location of the file to flash
  • Click Download button
  • Remove the battery from the device
  • Connect the USB cable
  • Flash process should start

How to enter recovery mode

  • Hold the Volume Up button, and then press the Power button

Links