LG Optimus L3 II (lg-vee3e)
Appearance
![]() The device running Weston | |
Manufacturer | LG |
---|---|
Name | Optimus L3 II |
Codename | lg-vee3e |
Released | 2013 |
Hardware | |
Chipset | Qualcomm MSM7225A Snapdragon S1 |
CPU | 1.0 GHz Cortex A5 |
GPU | Adreno 200 |
Display | 240x320 3.2" IPS |
Storage | 4 GB |
Memory | 512 MB |
Architecture | armv7 |
Software | |
Original software | Android 4.1.2 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
postmarketOS kernel | 3.4.0 |
Unixbench Whet/Dhry score | 170.3 |
Flashing |
Partial |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
Broken |
Screen |
Partial |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Broken |
Audio |
Partial |
Camera |
Broken |
Camera Flash |
No data |
Connectivity | |
WiFi |
Broken |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
Broken |
SMS |
Broken |
Mobile data |
Broken |
Miscellaneous | |
FDE |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- LegoLivesMatter
Maintainer(s)
- LegoLivesMatter
Users owning this device
- LegoLivesMatter
- Stupidenbyace (Notes: In a drawer somewhere)
How to enter flash mode
While the device is off, hold Volume Up (for fastboot) / Volume Down (for recovery) + Home + Power until the screen turns on. When it turns on, release the power button, but keep pressing the other buttons until the device boots into fastboot (it will stay on the LG splashscreen, but will be visible with "fastboot devices") or recovery (will be obvious).
Installation
Only the boot image can be flashed using fastboot (requires flash:raw instead of flash, otherwise you will get a "Couldn't parse partition size '0x'" error), the rootfs must be flashed using an Android recovery zip.