Jump to content

LG Optimus L3 II (lg-vee3e)

From postmarketOS Wiki
Revision as of 08:36, 6 March 2021 by StandaSK (talk | contribs) (Cleanup)
LG Optimus L3 II
The device running Weston
The device running Weston
Manufacturer LG
Name Optimus L3 II
Codename lg-vee3e
Released 2013
Hardware
Chipset Qualcomm MSM7225A Snapdragon S1
CPU 1.0 GHz Cortex A5
GPU Adreno 200
Display 240x320 3.2" IPS
Storage 4 GB
Memory 512 MB
Architecture armv7
Software
Original software Android 4.1.2
postmarketOS
Category testing
Pre-built images no
postmarketOS kernel 3.4.0
Unixbench Whet/Dhry score 170.3
Features
Flashing
Partial
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
Broken
Screen
Partial
Touchscreen
Works
Multimedia
3D Acceleration
Broken
Audio
Partial
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Broken
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
Broken
SMS
Broken
Mobile data
Broken
Miscellaneous
FDE
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • LegoLivesMatter

Maintainer(s)

  • LegoLivesMatter

Users owning this device


How to enter flash mode

While the device is off, hold Volume Up (for fastboot) / Volume Down (for recovery) + Home + Power until the screen turns on. When it turns on, release the power button, but keep pressing the other buttons until the device boots into fastboot (it will stay on the LG splashscreen, but will be visible with "fastboot devices") or recovery (will be obvious).

Installation

Only the boot image can be flashed using fastboot (requires flash:raw instead of flash, otherwise you will get a "Couldn't parse partition size '0x'" error), the rootfs must be flashed using an Android recovery zip.

Known issues

  • Xorg triggers a lot of "FBIOPUTCMAP: Invalid argument" errors, reason is still unknown. Only use Wayland compositors for now. (XWayland does work)
  • Screen has a red tint.

See also