Jump to content

Samsung Galaxy Note II LTE (samsung-t0lte)

From postmarketOS Wiki
Revision as of 21:48, 17 January 2022 by Jack Kekzoz (talk | contribs) (Hardware)
Samsung Galaxy Note II LTE
Galaxy Note II
Galaxy Note II
Manufacturer Samsung
Name Galaxy Note II LTE
Codename samsung-t0lte
Released 2012
Hardware
Chipset Exynos 4412 Quad
CPU Quad-core 1.6 GHz Cortex-A9
GPU Mali-400 MP4
Display 720x1280 AMOLED
Storage 16/32/64 GB
Memory 2 GB
Architecture armv7
Software
Original software Android 4.1.1 on Linux 3.0.31
postmarketOS
Category testing
Pre-built images no
Mainline yes
postmarketOS kernel 5.15
Features
Flashing
Partial
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
Works
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
Works
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
Works
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • Jack_Kekzoz

Users owning this device


How to enter flash mode

When the phone is powered off, press and hold down the Home, Vol Down and Power buttons to turn it on in Download mode.

If you have installed a custom recovery, then when the phone is powered off, press and hold down the Home, Vol Up and Power buttons to turn it on in Recovery mode.

Installation

You can install postmarketOS either by flashing the rootfs to an sdcard, and then flashing the kernel using Heimdall when the phone is in Download mode, or you can install it via a recovery zip. It is not possible currently to flash rootfs in Download mode, as Heimdall has issues with flashing rootfs currently (see Heimdall). Please note that for the recovery installation, if you enable FDE, you need to ensure your custom recovery supports the cipher you are using.

FDE

FDE works, but for some reason, not with hardware acceleration.

Hardware

Part Notes Mainline kernel support
GPU Mali-400 MP4 Y
Panel Samsung S6EVR02 LCD panel N - but there is a patch in pmaports
Touchscreen MMS152 Y
WiFi BCM4334 Y - brcmfmac driver is in mainline but it reportedly doesn't work ok (when it has loaded the necessary proprietary firmware)
Bluetooth BCM4334
GPS MDM9615
Modem MDM9615 - same as in samsung-m3 (GT-i9305)
Fuel gauge MAX17047
MFD MAX77686
Audio codec WM1811
Front Camera S5K6A3 Y
Back Camera S5C73M3 Y
Flash LED MAX77693
Notification LED AN30259A
Accelerometer/Gyroscope LSM330DLC
Touchkey Cypress ???
Magnetometer AK8963C
Proximity/Light sensor CM36651
MHL SII9244BO

[1]

See also