InFocus New Tab F1 (infocus-flatfish)
Appearance
![]() InFocus New Tab F1 running Weston | |
Manufacturer | InFocus |
---|---|
Name | New Tab F1 |
Codename | infocus-flatfish |
Released | 2014 |
Hardware | |
Chipset | Allwinner A31 |
CPU | Quad core 1.0 GHz |
GPU | PowerVR SGX544MP2 |
Display | 800×1280 |
Storage | 16 GB |
Memory | 2 GB |
Software | |
Original software | Firefox OS 1.4 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- Rudloff
Maintainer(s)
- Rudloff
What works
- Flashing
- USB network
- Display (but it only uses a part of the screen)
- Touchscreen
- Weston
- XWayland
Not tested
- Full disk encryption
- Audio
- Accelerometers
- Bluetooth
- GPS
- Wifi
- Camera
- Battery
What does not work
How to enter flash mode
The original bootloader can't boot in fastboot mode so you need to flash a new one. You can follow the instructions here.
With the new bootloader, you can now boot into fast boot mode:
- Power off the device.
- Press and HOLD the power key (do not release until after the next step)
- When the boot logo (Firefox OS Contribution Program) appears, press and HOLD the Volume+ key until the Fastboot logo appears. You may now release both buttons.
See also
- #1251 Initial pull request
- More info about the SoC
- Firefox OS Tablet Contribution Program