InFocus New Tab F1 (infocus-flatfish)
Appearance
| WARNING: This device cannot run postmarketOS, as its architecture is unsupported. |
| This device is still running on armhf, although it supports armv7. If you own it, change the device packages' architectures, test it and submit a patch. |
| This device has been archived. This means that it no longer appears in pmbootstrap and is likely broken. It can still be selected in pmbootstrap init by typing in the vendor and codename, but you will have to build the kernel package manually. |
|
InFocus New Tab F1 running Weston | |
| Manufacturer | InFocus |
|---|---|
| Name | New Tab F1 |
| Codename | infocus-flatfish |
| Released | 2014 |
| Type | tablet |
| Hardware | |
| Chipset | Allwinner A31 |
| CPU | 4x 1.0 GHz Cortex-A7 |
| GPU | PowerVR SGX544MP2 |
| Display | 800×1280 |
| Storage | 16 GB |
| Memory | 2 GB |
| Architecture | armhf |
| Software | |
Original software The software and version the device was shipped with. |
Firefox OS 1.4 |
Extended version The most recent supported version from the manufacturer. |
Firefox OS |
| postmarketOS | |
| Category | archived |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
| Device package |
|
| Kernel package |
|
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Whether charging and battery level reporting work. |
Untested
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Partial
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Works
|
Camera |
Untested
|
| Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Works
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Contributors
- Rudloff
Maintainer(s)
- Rudloff
Device owners
How to enter flash mode
The original bootloader can't boot in fastboot mode so you need to flash a new one. You can follow the instructions here.
With the new bootloader, you can now boot into fast boot mode:
- Power off the device.
- Press and HOLD the power key (do not release until after the next step)
- When the boot logo (Firefox OS Contribution Program) appears, press and HOLD the Volume+ key until the Fastboot logo appears. You may now release both buttons.
See also
- !1251 Initial pull request
- More info about the SoC
- Firefox OS Tablet Contribution Program