Jump to content

Lenovo A6000 (lenovo-a6000)

From postmarketOS Wiki
Revision as of 23:20, 19 December 2022 by Mas4hmad (talk | contribs) (Installation: Add qimei panel driver)
Lenovo A6000
Manufacturer Lenovo
Name A6000
Codename lenovo-a6000
Released 2015
Hardware
Chipset Qualcomm Snapdragon 410 (MSM8916)
CPU Quad-core 1.2 GHz Cortex-A53
GPU Adreno 306
Display 720x1280
Storage 8/16 GB
Memory 1/2 GB
Architecture aarch64
Software
Original software Android 4.4
postmarketOS
Category community
Pre-built images yes
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
Works
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
Works
Audio
Works
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Works
Bluetooth
Works
GPS
No data
Modem
Calls
Works
SMS
Works
Mobile data
Works
Miscellaneous
FDE
Works
Sensors
Accelerometer
Works
Magnetometer
Works
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data

Contributors

Users owning this device


How to enter flash mode

  • Fastboot: Power on the device with both Power and Volume Down buttons.
  • Recovery: Power on the device with Volume Down, Volume Up, and Power buttons.
  • lk2nd Fastboot: Power on the device. After it vibrates, hold Volume Down.
  • lk2nd Recovery: Power on the device. After it vibrates, hold Volume Up.
  • EDL: Connect device via USB as a peripheral with both Volume Up and Volume Down buttons.

Installation

  1. Make sure that you have qimei-ili9881, yassy-ili9881 or tianma-hx8394d panel. Other panels aren't supported yet.
  2. Install lk2nd. Although Lenovo already provides a Fastboot interface, lk2nd contains various quirks for booting mainline.
  3. Follow Qualcomm_Snapdragon_410/412_(MSM8916)#Installation.
    • If you want to use the modem, select the mainline-modem kernel.

Battery and charging

See Wileyfox_Swift_(wileyfox-crackling)#Battery_and_charging.

See also