Jump to content

Nokia 8110 4G (nokia-argon)

From postmarketOS Wiki
Revision as of 11:57, 26 December 2022 by SoySoy (talk | contribs) (Seperate software from version and remove n-android)
Nokia 8110 4G
Manufacturer Nokia
Name 8110 4G
Codename nokia-argon
Released 2018
Hardware
Chipset Qualcomm Snapdragon 205 (MSM8905)
CPU 2x 1.1 GHz Cortex-A7
GPU Adreno 304
Display 240x320 TFT
Storage 4 GB
Memory 512 MB
Architecture armv7
Software
Original software KaiOS
Original version 2.5
postmarketOS
Category testing
Pre-built images no
Mainline yes
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
Partial
Screen
Works
Multimedia
3D Acceleration
No data
Audio
Broken
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Works
Bluetooth
Works
GPS
No data
NFC
No data
Modem
Calls
Broken
SMS
Broken
Mobile data
Broken
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

Users owning this device


Mainline

The mainline fork at https://gitlab.com/bananian/msm8909-mainline is used. It is based on the msm8909 and msm8916-mainline trees and also has support for the Nokia 8000 4G.

Display

The display is connected via SPI and works with the tinydrm panel-mipi-dbi driver. It is usable even without GPU or MDP3 support. MDP3 seems to be unused on this device because it isn't connected to the display in any way. Backlight control also works.

Modem

Modem is broken, rmtfs needs a patch: https://github.com/andersson/rmtfs/pull/17

Battery

Uses the incomplete voltage mode BMS driver, same problem as Wileyfox_Swift_(wileyfox-crackling)#Battery_and_charging.

Flashing

EDL mode can be entered by pressing the Up and Down keys while plugging in or turning on the phone. Use the loader from https://edl.bananahackers.net and the edl.py fork at https://github.com/andybalholm/edl.

Partitions can also be written directly using dd on rooted devices.

Installation

Install lk2nd from https://gitlab.com/bananian/lk2nd (prebuilt artifacts available) into the boot partition. Now you can use pmbootstrap to flash everything else via fastboot.

See also

Open Source Releases - Nokia