Sony Xperia Z1 (sony-honami)
Appearance
WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it. The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly. |
![]() Sony Xperia Z1 | |
Manufacturer | Sony |
---|---|
Name | Xperia Z1 |
Codename | honami |
Released | 2013 |
Hardware | |
Chipset | Qualcomm MSM8974 Snapdragon 800 |
CPU | Quad-core 2.2 GHz Krait 400 |
GPU | Adreno 330 |
Display | 1080x1920 |
Storage | 16 GB |
Memory | 2 GB |
Architecture | armhf |
Software | |
Original software | Android 4.2 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- limiter121
- ata2001 (work on Z1C)
Maintainer(s)
- limiter121
What works
- Display
- Touchscreen
- Network through USB
- Telnet in initramfs
- SSH
- Wifi
What does not work
How to enter flash mode
Press VOL UP while plugging the USB cable (fastboot mode)
Installation
Photos
Other Information
- It should be possible to run The Mainline Kernel on the device. At least there is a
dts
file already in the 4.14 kernel:arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts