Jump to content

Xiaomi POCO M2 Pro / Redmi Note 9S / Redmi Note 9 Pro / Redmi Note 9 Pro Max / Redmi Note 10 Lite (xiaomi-miatoll)

From postmarketOS Wiki
Revision as of 18:35, 26 June 2023 by Ungeskriptet (talk | contribs) (Add section about different variants)
Xiaomi POCO M2 Pro /
Redmi Note 9S /
Redmi Note 9 Pro /
Redmi Note 9 Pro Max /
Redmi Note 10 Lite
Xiaomi Redmi Note 9 Pro (xiaomi-joyeuse) with aftermarket display
Xiaomi Redmi Note 9 Pro (xiaomi-joyeuse) with aftermarket display
Manufacturer Xiaomi
Name POCO M2 Pro /
Redmi Note 9S /
Redmi Note 9 Pro /
Redmi Note 9 Pro Max /
Redmi Note 10 Lite
Codename xiaomi-miatoll
Released 2020
Hardware
Chipset Qualcomm Snapdragon 720G (SM7125)
CPU Octa-core (2x2.3 GHz Kryo 465 Gold & 6x1.8 GHz Kryo 465 Silver)
GPU Adreno 618
Display 1080 x 2400 (IPS LCD, 6.67")
Storage 64/128 GB
Memory 4/6 GB
Architecture aarch64
Software
Original software Android
Original version 10 (MIUI 11)
FOSS bootloader partial
postmarketOS
Category testing
Pre-built images no
Mainline yes
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
Broken
Screen
Works
Touchscreen
Broken
Multimedia
3D Acceleration
Broken
Audio
Broken
Camera
Broken
Camera Flash
Broken
IR TX
Broken
Connectivity
WiFi
Broken
Bluetooth
Broken
Ethernet
Broken
GPS
Broken
NFC
Broken
Modem
Calls
Broken
SMS
Broken
Mobile data
Broken
Miscellaneous
FDE
Works
USB OTG
Broken
Sensors
Accelerometer
Broken
Magnetometer
Broken
Ambient Light
Broken
Proximity
Broken
Hall Effect
Broken
Haptics
Broken
Barometer
Broken
Power Sensor
Broken

Contributors

Users owning this device

Know your variant

There are 6 Xiaomi smartphones with the SM7125 SoC:

  • POCO M2 Pro (gram)
  • Redmi Note 9S (curtana)
  • Redmi Note 9 Pro (Global, joyeuse)
  • Redmi Note 9 Pro (India, curtana)
  • Redmi Note 9 Pro Max (excalibur)
  • Redmi Note 10 Lite (curtana)

These devices share a common board design (a.k.a miatoll) with only a few differences. If you are not sure which variant you have follow this page.

How to enter flash mode

  • Fastboot: Power on the device with both Power and Volume Down buttons.
  • Recovery: Power on the device with both Power and Volume Up buttons.

EDL Mode

Note Note: An authenticated Mi account for EDL flashing is required.

To enter the EDL mode, disconnect the battery and short these two points while powering it on with USB. If lsusb -d 05c6:9008 shows you a device, you can let go of the short.

UART

The UART points are located on the front on the mainboard, so thin wires should be soldered to the tiny test points to route them to the back.

Installation

/* Not yet */

See also