Nokia N9 (nokia-lankku)
Appearance
WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it. The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly. |
![]() postmarketOS loading screen with TTY on top | |
Manufacturer | Nokia |
---|---|
Name | N9 |
Codename | nokia-n9 |
Released | 2011 |
Hardware | |
Chipset | TI OMAP 3630 |
CPU | Single-core 1.0 GHz Cortex A8 |
GPU | PowerVR SGX530 |
Display | "Clear Black" AMOLED 854 × 480 px |
Storage | 16/64 GB |
Memory | 1 GB |
Architecture | armhf |
Software | |
Original software | MeeGo |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
Flashing |
No data |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Partial |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- filippz
- pavelmachek
How to enter flash mode
This device is pretty similar to nokia N950, with minor differences in kernel. Bootloader has same problems. See https://elinux.org/N950
Kernel can be started without flashing, using:
$ sudo /data/l/maemo/0xffff/src/0xFFFF -m kernel:vmlinuz-nokia-n9-dtb -m initfs:initramfs-nokia-n9 -l -b
Note that attempt to pass command line arguments will result in kernel not booting on some devices, and that by booting custom kernel you get permanent boot slowdown with "you have modified your system" message.
Notes
Installation
Might be possible using Nemo flashing image.
Photos
- Running XFCE4
- PowerVR SGX (TI 4.10.00.01) drivers with v4.15-rc3 kernel
- postmarketOS loading screen with TTY on top (alternative photo)
Links
- #1046 Add basic support for Nokia N9