Banana Pi BPI-F3 (bananapi-bpi-f3)
Appearance
![]() | |
Manufacturer | Banana Pi |
---|---|
Name | BPI-F3 |
Codename | bpi-f3 |
Released | 2024 |
Type | single board computer |
Hardware | |
Chipset | SpacemiT K1 |
CPU | 8x SpacemiT X60 @ 1.6 / 2.0 GHz |
GPU | IMG BXE-2-32 |
Storage | SD Card, NVMe, or 8 / 16 / 32 / 128 GB eMMC |
Memory | 2 / 4 / 8 / 16 GB 64bit LPDDR4X |
Architecture | riscv64 |
Software | |
Original software | Bianbu Linux |
postmarketOS | |
Category | testing |
Pre-built images | no |
Internal storage |
No data |
---|---|
SD card |
No data |
Screen |
Works |
Multimedia | |
Camera Flash |
No data |
Connectivity | |
NFC |
No data |
Modem | |
Miscellaneous | |
HDMI/DP |
No data |
Sensors | |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Users owning this device
- Haui2 (Notes: Same issue as the roma pad. Needs specific sd card layout.)
How to enter flash mode
Use the download button or the DIP switch.
GPIO
PIN | Function | Function | PIN |
---|---|---|---|
1 | VCC3V3_SYS | VCC5V0_OUT | 2 |
3 | AP_I2C4_SDA_3V3 | VCC5V0_OUT | 4 |
5 | AP_I2C4_SCL_3V3 | GND | 6 |
7 | GPIO_70_3V3 / JTAG TDI | R_UART0_TXD_3V3 | 8 |
9 | GND | R_UART0_RXD_3V3 | 10 |
11 | GPIO_71_3V3 / JTAG TMS | GPIO_74_3V3 | 12 |
13 | GPIO_72_3V3 / JTAG TCK | GND | 14 |
15 | GPIO_73_3V3 / JTAG TDO | GPIO_91_3V3 | 16 |
17 | VCC3V3_SYS | GPIO_92_3V3 | 18 |
19 | SPI3_MOSI_3V3 | GND | 20 |
21 | SPI3_MISO_3V3 | GPIO_49_3V3 | 22 |
23 | SPI3_SCLK_3V3 | SPI3_CS_3V3 | 24 |
25 | GND | GPIO_50_3V3 | 2 |
DIP switches
QSPI_DATA1 | QSPI_DATA0 | Function |
---|---|---|
0 | 0 | TF Card -> EMMC |
1 | 0 | TF Card -> SPI NOR |
0 | 1 | TF Card -> SPI NAND |
1 | 1 | TF Card -> SD |
QSPI_DATA3 | Function |
---|---|
0 | Start up |
1 | Download mode |
QSPI_DATA2 | Function |
---|---|
0 | USB |
1 | UART |
JTAG_SEL | Function |
---|---|
0 | GPIO (off) |
1 | JTAG |
MMC1_CMD | Route |
---|---|
0 | X60 |
1 | N308 |
See also
https://wiki.banana-pi.org/Banana_Pi_BPI-F3
https://developer.spacemit.com/documentation?token=QH99wkIObiUnBYkZzDHcvrvvnHo
Bringing up the Banana Pi F3 https://dev.to/luzero/bringing-up-bpi-f3-part-1-3bm4
https://archive.spacemit.com/tools/openocd/
https://item.taobao.com/item.htm?id=789483353026