Samsung Galaxy S Relay 4G (samsung-apexq)
Appearance
WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it. The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly. |
![]() Samsung Galaxy S Relay 4G | |
Manufacturer | Samsung |
---|---|
Name | Galaxy S Relay 4G |
Codename | samsung-apexq |
Released | 2012 |
Hardware | |
Chipset | Qualcomm Snapdragon S4 |
CPU | 1.5 GHz dual-core Krait |
GPU | Adreno 225 |
Display | 480x800 Super AMOLED |
Storage | 8 GB |
Memory | 1 GB |
Architecture | armhf |
Software | |
Original software | Android 4.0.4 ICS |
postmarketOS | |
Category | testing |
Pre-built images | no |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Status: Boots. Weston demo works with touch and keyboard.
Contributors
- silver
Maintainer(s)
- silver
Installation
You will need to do this twice during the flashing step.
Set phone to ODIN mode
1. Turn off phone 2. Connect USB cable 3. Hold VOLUME_DOWN + HOME + POWER until you get Warning!! screen 4. Push VOLUME_UP to continue to ODIN mode screen
./pmbootstrap.py flasher flash_rootfs
Phone will reboot. Follow above instructions again.
./pmbootstrap.py flasher flash_kernel
Port information
- kernel android_kernel_samsung_d2
- commit 87f5fcaf7afef878914c3fcca2c2fd395f285902
- defconfig LineageOS/android_kernel_samsung_d2/87f5fcaf7afef878914c3fcca2c2fd395f285902/arch/arm/configs/cyanogen_apexq_defconfig
- deviceinfo populated with boot.img from cm backup March 2017