Jump to content

LG Optimus L5 (lg-e610)

From postmarketOS Wiki
Revision as of 06:29, 2 July 2019 by Fizzo (talk | contribs) (Mentioned recovery zip flashing)
LG Optimus L5
CHANGE_ME
CHANGE_ME
Manufacturer LG
Name Optimus L5
Codename lg-e610
Released 2012
Hardware
Chipset Qualcomm MSM7225A Snapdragon S1
CPU 800MHz Cortex-A5
GPU Adreno 200
Display 320x480
Storage 4GB
Memory 512MB
Architecture armv7
Software
Original software Android 4.0.3
postmarketOS
Category testing
Pre-built images no
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
Partial
Touchscreen
No data
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • Nimayer

Maintainer(s)

  • Nimayer

Users owning this device

  • Fizzo (Notes: pmOS port author)
  • J.r (Notes: Currently unused, will maybe play around with PmOS on it some day)
  • Shipa (Notes: heavily used)
  • Zekiu (Notes: vendor: "plus")


How to enter flash mode

From off state, press and hold Volume UP + Power + Home, then release Power and hold the other two.

The phone will stay on the LG logo and show a black log screen once you connect the USB cable.

Internal memory Installation

Flashing via fastboot does not work, both commands

 $ pmbootstrap flasher flash_rootfs
 $ pmbootstrap flasher flash_rootfs --partition userdata

Fail with:

 [12:50:20] (native) flash rootfs image
 target didn't report max-download-size
 Sending 'userdata' (464896 KB)...
 FAILED (remote: data too large)

You can flash by recovery zip or SD card.

SD card Installation

- Build image (on your computer) and prepare the installation as usual

 $ pmbootstrap init
 $ pmbootstrap build device-lg-e610
 $ pmbootstrap install --no-fde --sdcard=/dev/mmcblk0

- Put the phone in Fastboot mode and connect it to your computer

 $ pmbootstrap flasher flash_kernel 

See also