Kosagi Fernvale (kosagi-fernvale)
![]() |
WARNING: This device cannot run postmarketOS, as its architecture is unsupported. |
Manufacturer | Kosagi |
---|---|
Name | Fernvale |
Codename | kosagi-fernvale |
Category | testing |
Hardware | |
Chipset | Mediatek MT6260 |
CPU | ARM7EuJ-S |
GPU | some form of 2d gpu |
Display | None |
Storage | sdcard |
Memory | ? |
Architecture | armv6 |
This device is unsupported by postmarketOS (most likely due to its architecture being unsupported, or limited system resources).
Reason: ARMv6 without FPU/VFP #1203
Reason: ARMv6 without FPU/VFP #1203
USB Networking | |
---|---|
Flashing |
Broken |
Display |
Broken |
WiFi |
Broken |
FDE | |
Mainline | |
3D Acceleration | |
Bluetooth | |
Internal storage | |
USB OTG | |
NFC | |
Magnetometer | |
---|---|
Ambient Light | |
Proximity | |
Hall Effect | |
Barometer | |
Power Sensor | |
Built-in DVB | |
---|---|
Camera Flash | |
Keyboard | |
Touchpad | |
USB-A | |
HDMI/DP | |
Ir TX | |
Ir RX | |
Stylus | |
SD card | |
Haptics | |
Ethernet | |
FOSS bootloader | |
Available from sysmocom (commercial side of osmocom project): http://shop.sysmocom.de/products/fernvale-mt6260-reverse-engineering-development-kit-dvt2
Mediatek 6260 based board designed through reverse engineering efforts detailed here: https://www.bunniestudios.com/blog/?p=4297
MT6260 Datasheet available here: https://drive.google.com/file/d/14UcrFRB3rYW2bjttFZ7GA4zAi_HL-yjZ/view?usp=sharing
User:Unrznbl is working on porting osmocom-bb (open source 2G baseband firmware) to fernvale and other MT626x based devices such as DZ-09_Watch and SIM800_Modules.