LG Optimus L7 II (lg-vee7e)
Appearance
(Redirected from LG Optimus L7 II)
![]() running sxmo | |
Manufacturer | LG |
---|---|
Name | Optimus l7 II |
Codename | lg-vee7e |
Model | LG-P710 |
Released | 2013 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon S4 Play (MSM8225) |
CPU | Dual-core 1.0 GHz Cortex-A5 |
GPU | Adreno 203 |
Display | 480x800 TFT LCD |
Storage | 4GB |
Memory | 768MB |
Architecture | armv7 |
Software | |
Original software The software and version the device was shipped with. |
Android 4.1.2 |
FOSS bootloader | no |
postmarketOS | |
Category | downstream |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
3.4.0 |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
218.2 |
Device package |
![]() |
Kernel package |
![]() |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Works
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS, ... |
Works
|
SD card Also includes other external storage cards |
Works
|
Battery Charging and battery level reporting works |
Untested
|
Screen Display works. Ideally with sleep mode and brightness control. |
Partial
|
Touchscreen |
Partial
|
Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Camera Flash |
Untested
|
Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Untested
|
NFC Near Field Communication |
Untested
|
Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching |
Untested
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Untested
|
Magnetometer Sensor to measure magnetism |
Untested
|
Ambient Light |
Untested
|
Proximity |
Untested
|
Hall Effect Also known as flip cover sensor |
Untested
|
Haptics |
Untested
|
Barometer Sensor to measure air pressure |
Untested
|
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Untested
|
Contributors
Users owning this device
How to enter flash mode
If you have a custom recovery hold
+ +extra button until you start to boot.Installation
Use pmbootstrap flasher --method=adb sideload
or pmbootstrap export
and then adb sideload
using your systems version of adb, or copy the zip to the SD-card and install with your recovery
Partition Map
Keep in mind that the contents in here are not necessarily representative of the factory state of the device
fdisk -l /dev/mmcblk0 Disk /dev/mmcblk0: 3.64 GiB, 3909091328 bytes, 7634944 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 * 1 40 40 20K 4d QNX4.x #Bootloader shenanigans /dev/mmcblk0p2 41 2088 2048 1M 45 unknown #Bootloader shenanigans /dev/mmcblk0p3 2089 10280 8192 4M 46 unknown #Bootloader shenanigans related to the "emergency mode !!" screen /dev/mmcblk0p4 10281 7512064 7501784 3.6G 5 Extended #Just the extended partition that houses all the other ones /dev/mmcblk0p5 131072 139263 8192 4M 47 unknown #TWRP claims it is IMEI, but it actually has lk in there /dev/mmcblk0p6 139264 147455 8192 4M 2c unknown #no clue /dev/mmcblk0p7 147456 155647 8192 4M 58 unknown #no clue /dev/mmcblk0p8 155648 204799 49152 24M 77 unknown #/misc /dev/mmcblk0p9 204800 229375 24576 12M 48 unknown #Boot (as in boot.img, not pmos_boot) /dev/mmcblk0p10 229376 237567 8192 4M 4a unknown #no clue /dev/mmcblk0p11 237568 245759 8192 4M 4b unknown #no clue /dev/mmcblk0p12 245760 303103 57344 28M 49 unknown #Modem things of some kind /dev/mmcblk0p13 303104 360447 57344 28M 6c unknown #Slightly different modem things /dev/mmcblk0p14 360448 3145727 2785280 1.3G 83 Linux #System, by default postmarketOS gets installed here /dev/mmcblk0p15 3145728 3170303 24576 12M 83 Linux #This partition snitches on you for rooting your phone :D /dev/mmcblk0p16 3170304 3481599 311296 152M 83 Linux #Cache /dev/mmcblk0p17 3481600 3506175 24576 12M 60 unknown #Recovery boot.img /dev/mmcblk0p18 3506176 3522559 16384 8M 83 Linux #Firmware? /dev/mmcblk0p19 3522560 3547135 24576 12M 6b unknown #aboot, lk /dev/mmcblk0p20 3547136 7340031 3792896 1.8G 83 Linux #Data /dev/mmcblk0p21 7340032 7348223 8192 4M ff BBT #13 A5 84 51 E2 34 A2 84 03 and then a veritable mountain of zeros /dev/mmcblk0p22 7348224 7356415 8192 4M ff BBT #0x56F1 Bytes of data, then zeros like above /dev/mmcblk0p23 7356416 7389183 32768 16M 83 Linux #Firmware? /dev/mmcblk0p24 7389184 7397375 8192 4M ff BBT #Just zeros this time /dev/mmcblk0p25 7397376 7503871 106496 52M 83 Linux #A file "readme" content:"This binary does not use cupss overlay mechanism" ??? /dev/mmcblk0p26 7503872 7512063 8192 4M ff BBT #9D D4 10 00 FF FF FF FF ... to 0x1FFF, zeros to the end of the partition /dev/mmcblk0p27 7512064 7520255 8192 4M ff BBT #'strings mmcblk0p27.img' => 'BANGSIRI' ... what???
See also
- pmaports!352 Initial merge request
- pmaports!2688 Modernize aport
- pmaports!2689 Update architecture