Pine64-quartz64-b
Appearance
Quartz64 B is development board with the RK3566 SoC with Raspberry Pi form factor produced by Pine64 for the Linux mobile community.
|
The Quartz64 B The Quartz64 B | |
| Manufacturer | PINE64 |
|---|---|
| Name | Quartz64 B |
| Codename | pine64-quartz64-b |
| Released | 2021 |
| Type | single board computer |
| Hardware | |
| Chipset | Rockchip RK3566 |
| CPU | 4x 2Ghz Cortex-A55 |
| GPU | Mali G52 2EE |
| Memory | 8GB |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
Unknown |
Extended version The most recent supported version from the manufacturer. |
Unknown |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
| Device package |
|
| Kernel package |
|
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
| Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Works
|
| Connectivity | |
WiFi |
Works
|
Bluetooth |
Works
|
Ethernet |
Works
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Works
|
USB-A Whether the full-sized USB-A port works. |
Works
|
HDMI/DP Video and audio output with HDMI or DisplayPort. |
Works
|
| This device is based on the Rockchip RK3566. See the SoC page for common tips, guides and troubleshooting steps |
Installation
The Quartz64 B board does not come with any nonvolatile storage. You can either install the image onto an uSD card or there's a special connector that allows eMMC breakout board to be attached. It has also an adapter for USB port which enumerates it as a USB mass storage device.
You should now see the postmarketOS splash and the Quartz64 B will boot.