User:MartijnBraam/rb3011
Appearance
| This device is marked as not booting. |
|
The router The router | |
| Manufacturer | Mikrotik |
|---|---|
| Name | RB3011 |
| Codename | mikrotik-rb3011 |
| Released | 2015 |
| Type | embedded |
| Hardware | |
| Chipset | Qualcomm IPQ8064 |
| CPU | 4x Krait 300 |
| GPU | - |
| Display | 320x240 |
| Storage | 128MB |
| Memory | 1GB |
| Architecture | armv7 |
| Software | |
Original software The software and version the device was shipped with. |
RouterOS 6 |
Extended version The most recent supported version from the manufacturer. |
RouterOS |
| postmarketOS | |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Contributors
Users owning this device
How to enter flash mode
Device can boot over PXE with a network connected on port 1
Resources
Partition layout
/proc/mtd
dev: size erasesize name mtd0: 01000000 00020000 "kernel" mtd1: 07000000 00020000 "ubi" mtd2: 00020000 00010000 "SBL1" mtd3: 00020000 00010000 "MIBIB" mtd4: 00040000 00010000 "SBL2" mtd5: 00080000 00010000 "SBL3" mtd6: 00010000 00010000 "DDRCONFIG" mtd7: 00010000 00010000 "SSD" mtd8: 00080000 00010000 "TZ" mtd9: 00020000 00010000 "RPM" mtd10: 00040000 00010000 "APPSBL" mtd11: 00040000 00010000 "RouterBoot" mtd12: 0000f000 00010000 "bootloader" mtd13: 00001000 00010000 "hard_config" mtd14: 00001000 00010000 "soft_config"