Xiaomi Redmi Note 10 Pro (xiaomi-sweet)

From postmarketOS Wiki
Xiaomi Redmi Note 10 Pro
Xiaomi Redmi Note 10 Pro
Xiaomi Redmi Note 10 Pro
Manufacturer Xiaomi
Name Redmi Note 10 Pro
Codename xiaomi-sweet
Released 2021
Type handset
Hardware
Chipset Qualcomm Snapdragon 732G (SM7150-AC)
CPU Octa-core (2x2.3 GHz Kryo 470 Gold & 6x1.8 GHz Kryo 470 Silver)
GPU Adreno 618
Display 1080 x 2400, 20:9, 6.67", AMOLED, 120Hz, 450/1200 nits
Storage 64/128 GB
Memory 6/8 GB
Architecture aarch64
Software
Original software Android
Original version 11 (MIUI 12)
Extended version 13 (MIUI 14)
FOSS bootloader no
postmarketOS
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories.
This means that it cannot be selected in pmbootstrap.
Features
Flashing
Works
USB Networking
Works
Internal storage
Works
SD card
Works
Battery
Partial
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
Works
Audio
Broken
Camera
Broken
Camera Flash
Works
Connectivity
WiFi
Works
Bluetooth
Works
GPS
NFC
Works
Modem
Calls
Works
SMS
Works
Mobile data
Works
Miscellaneous
FDE
USB OTG
Works
Sensors
Accelerometer
Works
Magnetometer
Works
Ambient Light
Works
Proximity
Broken
Haptics
Works
This device is based on the Snapdragon 732G.
See the SoC page for common tips, guides and troubleshooting steps

Contributors

Maintainer(s)

  • The sm7150-mainline team

Users owning this device

  • Adrian (Notes: goodix/fpc/bq, pmOS development device)
  • AnaxMorden (Notes: Using Global 6/128GB (CrDroid))
  • Atipls (Notes: LineageOS, attempting mainline)
  • DymondZ (Notes: Global 6/64GB, AOSP)
  • Etn40ff (Notes: 8/128GB, AOSP)
  • Manofdiamond (Notes: Using Indian 6/128GB (AOSP))
  • Tau (Notes: Global 6GB/64GB (CrDroid))
  • Vvladii (Notes: Using Global 6/128GB (AOSP))
  • Zephyr1112 (Notes: 6/128GB, AOSP A12L - Main device)


Port status

Icon WARNING: THIS PORT WILL NOT WORK ON THE Redmi Note 12 Pro 4G (sweet_k6a). IF YOU TRY FLASHING IT, YOU WILL END WITH A BRICK!. SEE REDMI NOTE 12 PRO 4G PAGE INSTEAD

Downstream kernel compiles with pmOS's build system but the resulting artifact does not boot. The same source code compiles also using android's build system and the resulting artifact boots. (See below for the required steps.)

Flash modes

  • Fastboot mode: Power + Volume Down (adb reboot bootloader)
  • Fastbootd mode: adb reboot fastboot
  • Recovery mode: Power + Volume Up (adb reboot recovery, fastboot reboot recovery)

Installation Instructions

Unlock Bootloader (if not done)

  • First unlock your device (if not done yet). Use MiUnlock to unlock (Windows only). // If MiUnlock doesn't detect your device, follow this: Google USB Drivers install guide
  • Follow the Instructions on the selected site
  • Note: After that do not log off your Mi Account on your phone or it won't work! It may take 7 days or more to be able to unlock your device!

Install TWRP on Redmi Note 10 Pro

  • Follow these Instructions.
  • Turn the device off (or restart also works)
  • Note: You may need to connect your device to a computer with a USB cord or the phone will skip boot to recovery.
  • Hold Volume Up and Power button
  • Keep holding Volume Up until you see the TWRP recovery Logo.

Install pmOS

  • Mainline aport is currently available at: https://github.com/sm7150-mainline/pmaports
  • Before installing, back up your dtbo partition (using twrp/android: on the device run dd if=/dev/block/by-name/dtbo of=/sdcard/dtbo.img and then adb pull /sdcard/dtbo.img on the host
  • Reboot into the bootloader and erase the dtbo partition: adb reboot bootloader and fastboot erase dtbo if you do not do this, Linux will not boot due to the bootloader trying to merge the dtbo with mainline dtb, which will fail.
  • Install pmOS like normal: pmbootstrap flasher flash_kernel/rootfs

Tips and tricks

If pmOS is installed on a removable SD card android will continuously want mount and to reformat it. Unfortunately it does not look like it is possible to prevent this within android. A somewhat heavy duty workaround is to unbind the device, this requires root:

  • First find out which is the driver responsible for the sdcard:
  
 # readlink /sys/block/mmcblk0
 ../devices/platform/soc/8804000.sdhci/mmc_host/mmc0/mmc0:0001/block/mmcblk0
  • then unbind it
 
 # echo 8804000.sdhci > /sys/bus/platform/drivers/sdhci_msm/unbind

Mainlining

NOT VERIFIED: sourced from deviceinfohw, status from sm7150-xiaomi-sweet DTS (UNTESTED!)

Hardware type Chip Mainline status
WiFi chip wcn3990 Y
Charging IC TI bq2597x (early units) / LionSemi ln8000 (new units) Bringup in progress
Fuel gauge ? ?
GNSS ? ?
NFC ? (nq-nci driver on Android) Bringup in progress
Audio Awinic aw882xx, sm6150idpsndcar Bringup in progress
Accelerometer TDK icm4x6xx N/A
Touchscreen Goodix GT9896 (gtx8 driver on Android) Y
Display panel Samsung E3 Super AMOLED (dsi_k6_38_0c_0a_fhd_dsc_video_display interface on Android) Y (dsi0)
Ambient Light Sensor rohm_bu27030 ?
Gyroscope icm4x6xx ?
Magnetometer ak0991x ?
Video Adreno 618 N/A
UFS ? (64GB) / Micron MT128GASAO4U21 (128GB) Y / Y
Memory SK Hynix H9HQ15AFAMBDAR Y
Haptics Awinic AW8624 Y
SD Card Slot ? Y
USB ? Y
Flash ? Y

Other

Retrieved from "https://wiki.postmarketos.org/index.php?title=Xiaomi_Redmi_Note_10_Pro_(xiaomi-sweet)&oldid=63866"