Jump to content

InFocus New Tab F1 (infocus-flatfish): Difference between revisions

From postmarketOS Wiki
Rudloff (talk | contribs)
No edit summary
No edit summary
Line 13: Line 13:
| display =  800×1280
| display =  800×1280
| memory = 2 GB
| memory = 2 GB
| architecture = armhf
| status_usbnet = Y
| status_flashing = Y
| status_touch = Y
| status_screen = P
| status_wifi =
| status_xwayland = Y
| status_fde = Y
| status_mainline =
| status_battery =
| status_3d =
| status_accel =
| status_audio = Y
| status_bluetooth =
| status_camera =
| status_gps =
| status_mobiledata = -
| status_sms = -
| status_calls = -
| booting = yes
}}
}}



Revision as of 12:34, 6 September 2018

Warning WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it.
The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly.
InFocus New Tab F1
InFocus New Tab F1 running Weston
InFocus New Tab F1 running Weston
Manufacturer InFocus
Name New Tab F1
Codename infocus-flatfish
Released 2014
Hardware
Chipset Allwinner A31
CPU Quad core 1.0 GHz
GPU PowerVR SGX544MP2
Display 800×1280
Storage 16 GB
Memory 2 GB
Architecture armhf
Software
Original software Firefox OS 1.4
postmarketOS
Category testing
Pre-built images no
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
Partial
Touchscreen
Works
Multimedia
3D Acceleration
No data
Audio
Works
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Miscellaneous
FDE
Works
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • Rudloff

Maintainer(s)

  • Rudloff

What works

  • Flashing
  • USB network
  • Display (but it only uses a part of the screen)
  • Touchscreen
  • Full disk encryption
  • Audio (only with headset)
  • Weston
  • XWayland

Not tested

  • Accelerometers
  • Bluetooth
  • GPS

What does not work

  • Wifi (needs bcm40183b2 firmware)
  • Camera
  • Battery

How to enter flash mode

The original bootloader can't boot in fastboot mode so you need to flash a new one. You can follow the instructions here.

With the new bootloader, you can now boot into fast boot mode:

  • Power off the device.
  • Press and HOLD the power key (do not release until after the next step)
  • When the boot logo (Firefox OS Contribution Program) appears, press and HOLD the Volume+ key until the Fastboot logo appears. You may now release both buttons.

See also