ODROID XU4 (odroid-xu4): Difference between revisions
Appearance
m Seperate software from version and remove n-android |
Add note about broken u-boot 2023.01 for odroid devices |
||
Line 65: | Line 65: | ||
== Installation == | == Installation == | ||
{{Note|1=u-boot 2023.01 cannot boot odroid devices, patches has been sent to u-boot but not merged yet: https://lists.denx.de/pipermail/u-boot/2023-February/508425.html}} | |||
1. Use pmbootstrap to create a bootable SD card: | 1. Use pmbootstrap to create a bootable SD card: |
Revision as of 20:21, 12 March 2023
![]() ODROID XU4 | |
Manufacturer | ODROID |
---|---|
Name | XU4 |
Codename | odroid-xu4 |
Released | 2015 |
Hardware | |
Chipset | Samsung Exynos 5422 |
CPU | 4x 1.9 GHz A15 & 4x 1.3 GHz A7 |
GPU | Mali-T628 |
Display | None |
Storage | eMMC card or microSD |
Memory | 2GB LPDDR3 |
Architecture | armv7 |
Software | |
Original software | Ubuntu |
Original version | 20.04 LTS |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
USB Networking |
Works |
---|---|
Internal storage |
No data |
SD card |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera Flash |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
Maintainer(s)
Users owning this device
- Grimler
- Langfingaz (Notes: Running PostmarketOS edge)
- LongnoseRob (Notes: pmOS (edge), UI: phosh)
Installation
u-boot 2023.01 cannot boot odroid devices, patches has been sent to u-boot but not merged yet: https://lists.denx.de/pipermail/u-boot/2023-February/508425.html |
1. Use pmbootstrap to create a bootable SD card:
pmbootstrap init # pick 'odroid' as manufacturer, 'xu4' as device and 'none' as UI. pmbootstrap install --sdcard=/dev/sdX
You must install the nonfree firmware package for this device to get it booting. It contains early bootloaders and trustzone firmware. The early bootloaders initialise the hardware and then boots u-boot.
2. Insert SD card into the Odroid XU4, plug in the Ethernet cable and turn it on.
3. The Odroid XU4 should boot up and become accessible over SSH.
GPU
See 3D_Acceleration#Mali_T628.
See also
- Its sibling odroid-hc2
- pmaports!2860 Initial merge request
- pmbootstrap!2069 Boot binary flashing support