Google Nexus 10 (samsung-manta): Difference between revisions
Appearance
No edit summary |
No edit summary |
||
Line 52: | Line 52: | ||
== Installation == | == Installation == | ||
See [[https://wiki.postmarketos.org/wiki/Installation_guide]] | See [[https://wiki.postmarketos.org/wiki/Installation_guide Installation guide]]. | ||
== Power == | == Power == |
Revision as of 10:19, 31 January 2021
This device is still running on armhf, although the processor supports armv7. If you own it, change it and test it that way. |
![]() Google Nexus 10 | |
Manufacturer | Google (Samsung) |
---|---|
Name | Nexus 10 |
Codename | samsung-manta |
Released | 2012 |
Hardware | |
Chipset | Exynos 5250 |
CPU | 1.7 GHz Dual-core Cortex-A15 |
GPU | Mali T-604 |
Display | 2560x1600 IPS |
Storage | 16/32 GB |
Memory | 2 GB |
Architecture | armv7 |
Software | |
Original software | Android 4.2.2 on Linux 3.0 |
postmarketOS | |
Category | testing |
Pre-built images | no |
postmarketOS kernel | Lineage 3.4.113 |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
Works |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- BakaOsaka
- MartijnBraam
Users owning this device
- Alexmrqt
- Blacksilver (Notes: + Replaced battery)
- Ecloud
- Grom (Notes: 2 of them)
- Jenneron
- Joshaspinall (Notes: Boots, no DE)
- Kevinwidjaja21 (Notes: Running PMOS sxmo-de-sway. Power button/Volume broken.)
- Lantizia (Notes: 4 of them)
- MartijnBraam
- Russanandres (Notes: CyanogenMod 10)
How to enter flash mode
- Connect a USB cable
- Power the device off
- Hold power + volume up
- You should get a bootloader screen saying "Downloading... Do not turn off target !!"
Installation
See [Installation guide].
Power
By default the device will drain its battery even if it is connected to your PC because USB does only provide ~100mA. This can be changed with:
sudo sh -c "echo 1 > /sys/class/power_supply/smb347-usb/usb_hc"
If you want to use a standalone charger, the following commands have to be issued after you plugged in the charger:
sudo sh -c "echo 1 > /sys/class/power_supply/smb347-usb/charger_detection"
Issue the following command to monitor the power consumption:
cat /sys/class/power_supply/ds2784-fuelgauge/current_now
A positive current value means that the battery is charging while a negative current discharges the battery.
Touchscreen
After booting the UI doesn't react to user input. Restarting lightdm solves this:
sudo rc-service lightdm restart
Photos
Mainline
The Exynos 5250 has support in the mainline kernel, so this tablet might be a good candidate.