Google Nexus 10 (samsung-manta): Difference between revisions
Appearance
No edit summary |
No edit summary |
||
Line 48: | Line 48: | ||
* Connect a USB cable | * Connect a USB cable | ||
* Power the device off | * Power the device off | ||
* Hold power + volume | * Hold power + volume down | ||
* You should get a bootloader screen saying "Downloading... Do not turn off target !!" | * You should get a bootloader screen saying "Downloading... Do not turn off target !!" | ||
Revision as of 10:42, 31 January 2021
This device is still running on armhf, although the processor supports armv7. If you own it, change it and test it that way. |
![]() Google Nexus 10 | |
Manufacturer | Google (Samsung) |
---|---|
Name | Nexus 10 |
Codename | samsung-manta |
Released | 2012 |
Hardware | |
Chipset | Exynos 5250 |
CPU | 1.7 GHz Dual-core Cortex-A15 |
GPU | Mali T-604 |
Display | 2560x1600 IPS |
Storage | 16/32 GB |
Memory | 2 GB |
Architecture | armv7 |
Software | |
Original software | Android 4.2.2 on Linux 3.0 |
postmarketOS | |
Category | testing |
Pre-built images | no |
postmarketOS kernel | Lineage 3.4.113 |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
Works |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- BakaOsaka
- MartijnBraam
Users owning this device
- Alexmrqt
- Blacksilver (Notes: + Replaced battery)
- Ecloud
- Grom (Notes: 2 of them)
- Jenneron
- Joshaspinall (Notes: Boots, no DE)
- Kevinwidjaja21 (Notes: Running PMOS sxmo-de-sway. Power button/Volume broken.)
- Lantizia (Notes: 4 of them)
- MartijnBraam
- Russanandres (Notes: CyanogenMod 10)
How to enter flash mode
- Connect a USB cable
- Power the device off
- Hold power + volume down
- You should get a bootloader screen saying "Downloading... Do not turn off target !!"
Installation
See Installation guide.
Power
By default the device will drain its battery even if it is connected to your PC because USB does only provide ~100mA. This can be changed with:
sudo sh -c "echo 1 > /sys/class/power_supply/smb347-usb/usb_hc"
If you want to use a standalone charger, the following commands have to be issued after you plugged in the charger:
sudo sh -c "echo 1 > /sys/class/power_supply/smb347-usb/charger_detection"
Issue the following command to monitor the power consumption:
cat /sys/class/power_supply/ds2784-fuelgauge/current_now
A positive current value means that the battery is charging while a negative current discharges the battery.
Touchscreen
After booting the UI doesn't react to user input. Restarting lightdm solves this:
sudo rc-service lightdm restart
Photos
Mainline
The Exynos 5250 has support in the mainline kernel, so this tablet might be a good candidate.