Xiaomi Redmi 2 (xiaomi-wt88047): Difference between revisions
Appearance
Add list of cameras supported by the original Android kernel and information about their use and support. |
m Use template to hint about SoC specific page |
||
Line 37: | Line 37: | ||
| status_nfc = - | | status_nfc = - | ||
| booting = yes | | booting = yes | ||
}} | }}{{Based on SoC|Qualcomm_Snapdragon_410/412_(MSM8916)|Snapdragon 410}} | ||
== Contributors == | == Contributors == | ||
Line 57: | Line 57: | ||
# Follow [[Qualcomm_Snapdragon_410/412_(MSM8916)#Installation]]. (Flash from lk2nd Fastboot, not the stock Fastboot.) | # Follow [[Qualcomm_Snapdragon_410/412_(MSM8916)#Installation]]. (Flash from lk2nd Fastboot, not the stock Fastboot.) | ||
#* If you want to use the modem, select the <code>mainline-modem-<model></code> kernel, where model is either <code>wt88047</code> or <code>wt86047</code>, as checked above. | #* If you want to use the modem, select the <code>mainline-modem-<model></code> kernel, where model is either <code>wt88047</code> or <code>wt86047</code>, as checked above. | ||
== Camera == | == Camera == | ||
Line 253: | Line 250: | ||
| - | | - | ||
|} | |} | ||
== See also == | == See also == |
Revision as of 07:19, 15 August 2021
![]() Xiaomi Redmi 2 Prime running Plasma Mobile | |
Manufacturer | Xiaomi |
---|---|
Name | Redmi 2 |
Codename | xiaomi-wt88047 (wingtech-wt88047) |
Released | 2015 |
Hardware | |
Chipset | Qualcomm MSM8916 Snapdragon 410 |
CPU | Quad-core 1.2 GHz Cortex-A53 |
GPU | Adreno 306 |
Display | 720 x 1280 |
Storage | 8 GB / 16 GB |
Memory | 1 GB / 2 GB |
Architecture | aarch64 |
Software | |
Original software | MIUI 6.0 (Android 4.4.4) |
postmarketOS | |
Category | community |
Pre-built images | yes |
Unixbench Whet/Dhry score | 918.9 |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
Works |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Works |
Audio |
Works |
Camera |
Broken |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
Works |
GPS |
Works |
Modem | |
Calls |
Works |
SMS |
Works |
Mobile data |
Works |
Miscellaneous | |
FDE |
Works |
USB OTG |
Works |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
Works |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
This device is based on the Snapdragon 410. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
- sylvieon
- User:Minecrell (mainline port)
Users owning this device
- Baonks81 (Notes: wt88047-HM2014821 wt86047-HM2014813 2GB/16GB Redmi 2 ProT)
- Bczeman
- Bolilingmeng89006 (Notes: 2014817)
- Bzy-080408 (Notes: 2014817)
- CEllenvia (Notes: 2014112(HM2LTE-CMCC), 1+8)
- DancesWithCycles (Notes: SXMO on pmOS working fine)
- Donihalim (Notes: pmos, sxmo, secondary device)
- Exkc (Notes: Dead)
- Hisssy (Notes: wt86047 with dsi_nt35521 panel)
- Icenowy
- Joel (Notes: wt88047)
- JulianGro (Notes: multiple different devices; one with serial output, not in use)
- KenOokamiHoro (Notes: 2014817)
- Luoyan (Notes: wt88047 1+8)
- Minecrell (Notes: wt86047)
- Soupborsh (Notes: no battery, broken usb port, no front camera)
- TipzTeam (Notes: 2014812: Dead LCD circuitry 2014816: Works fine, in great condition; 2014817: broken glass, not turning on)
- Tjari (Notes: 2014817; Display is loose and half-broken, battery is missing)
- Tony0812 (Notes: wt88047)
- Un1Gfn (Notes: wt88047 2014811 2GB/16GB)
- WonderfulShrineMaidenOfParadise
- Yjun
How to enter flash mode
- Fastboot: Power on the device with both and buttons.
- lk2nd Fastboot: Power on the device. After it vibrates, hold .
- lk2nd Recovery: Power on the device. After it vibrates, hold .
Installation
- Make sure you have latest firmware flashed. Follow the LineageOS installation guide until (including) Updating firmware.
- Check if you have
wt88047
orwt86047
(explained in the LineageOS installation guide in Updating firmware). - Install lk2nd. Although Xiaomi already provides a Fastboot interface, lk2nd contains various quirks for booting mainline.
- Follow Qualcomm_Snapdragon_410/412_(MSM8916)#Installation. (Flash from lk2nd Fastboot, not the stock Fastboot.)
- If you want to use the modem, select the
mainline-modem-<model>
kernel, where model is eitherwt88047
orwt86047
, as checked above.
- If you want to use the modem, select the
Camera
Last checked in kernel 5.13
Manufacturer | Originally supported | Megapixel | Known used | Mainlined | Working |
---|---|---|---|---|---|
OmniVision | ov13850 | 13.0 MP | yes | no | - |
OmniVision | ov13853_q13853a | 13.0 MP | no | no | - |
Samsung | s5k3l2 | 13.0 MP | no | no | - |
Samsung | s5k3l8 | 13.0 MP | no | no | - |
Samsung | s5k3l8_qtech | 13.0 MP | no | no | - |
Samsung | s5k3l8_sunny | 13.0 MP | no | no | - |
OmniVision | ov8858 | 8.0 MP | no | no | - |
OmniVision | ov8865_a11 | 8.0 MP | no | driver ov8865? | - |
OmniVision | ov8865_a11_sunny | 8.0 MP | no | driver ov8865? | - |
OmniVision | ov8865_q8v18a | 8.0 MP | yes | driver ov8865? | untested |
OmniVision | ov8865_qtech | 8.0 MP | no | driver ov8865? | - |
OmniVision | ov8865_sunny | 8.0 MP | no | driver ov8865? | - |
Samsung | s5k3h7_8916 | 8.0 MP | no | no | - |
Sony | imx219_q8n13a | 8.0 MP | yes | driver imx219? | untested |
OmniVision | ov5670_86001 | 5.0 MP | no | driver 5670? | - |
OmniVision | ov5670_a11 | 5.0 MP | no | driver 5670? | - |
OmniVision | ov5670_a11_sunny | 5.0 MP | no | driver 5670? | - |
OmniVision | ov5670_q5v41b | 5.0 MP | yes | driver 5670? | untested |
OmniVision | ov5670_q5v41b_lenplus | 5.0 MP | no | driver 5670? | - |
OmniVision | ov5670_q5v41b_qtech | 5.0 MP | no | driver 5670? | - |
OmniVision | ov5670_q5v41b_sunny | 5.0 MP | no | driver 5670? | - |
Samsung | s5k5e8 | 5.0 MP | no | no | - |
GalaxyCore | gc2355_8916 | 2.0 MP | yes | no | - |
OmniVision | ov2680 | 2.0 MP | no | yes | - |
OmniVision | ov2680_5987fhq | 2.0 MP | yes | driver ov2680? | untested |
SuperPix | sp2508 | 2.0 MP | no | no | - |
See also
- pmaports!62 Initial merge request
- pmaports!1604 Mainline merge request
- Device package