Jump to content

Samsung Galaxy S4 Mini dual sim (samsung-serranodsdd): Difference between revisions

From postmarketOS Wiki
Line 41: Line 41:


== Current main issues ==
== Current main issues ==
* Device doesn't automatically give itself mac address, ip, etc - you need to configure the network manually
* Device doesn't automatically give itself mac address, ip, etc - you need to [[configure the network manually | USB_Network ]]
* Device reboots immediately after flasher
* Device reboots immediately after flasher
* Charging is wierd; device boots when powered on but it's difficult getting it into fast if it has't connected to the charger for a while
* Charging is wierd; device boots when powered on but it's difficult getting it into fast if it has't connected to the charger for a while

Revision as of 15:46, 16 October 2018

Warning WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it.
The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly.
Samsung Samsung Galaxy S4 mini dual sim
CHANGE_ME
CHANGE_ME
Manufacturer Samsung
Name Samsung Galaxy S4 mini dual sim
Codename samsung-serranodsdd (i9192)
Released 2013
Hardware
Chipset Qualcomm Snapdragon 400
CPU 1.7 GHz dual-core Krait 300
GPU Adreno 305
Display 960x540
Storage Internal, with external SD slot
Memory 1.5GB
Architecture armhf
Software
Original software Android 4.2
postmarketOS
Category testing
Pre-built images no
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
Partial
Touchscreen
Partial
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

Maintainer(s)

Current main issues

  • Device doesn't automatically give itself mac address, ip, etc - you need to USB_Network
  • Device reboots immediately after flasher
  • Charging is wierd; device boots when powered on but it's difficult getting it into fast if it has't connected to the charger for a while
  • Screen has worked exactly once, on the initial flash (hence no image here)

How to enter flash mode

  • Hold home + volume down when booting the device

Installation

See also