Jump to content

Sony Xperia Z1 (sony-honami): Difference between revisions

From postmarketOS Wiki
SoySoy (talk | contribs)
m originalversion
m Add usb device id
Line 112: Line 112:
== Other Information ==
== Other Information ==
* It should be possible to run [[The Mainline Kernel]] on the device. At least there is a <code>dts</code> file already in the 4.14 kernel: <code>arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts</code>
* It should be possible to run [[The Mainline Kernel]] on the device. At least there is a <code>dts</code> file already in the 4.14 kernel: <code>arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts</code>
* USB device id: <code>0fce:d19a</code>


== Links ==
== Links ==

Revision as of 23:44, 25 June 2024

Sony Xperia Z1
Sony Xperia Z1
Sony Xperia Z1
Manufacturer Sony
Name Xperia Z1
Codename sony-honami
Released 2013
Hardware
Chipset Qualcomm Snapdragon 800 (MSM8974)
CPU Quad-core 2.2 GHz Krait 400
GPU Adreno 330
Display 1080x1920
Storage 16 GB
Memory 2 GB
Architecture armv7
Software
Original software Android
Original version 4.2
postmarketOS
Category testing
Pre-built images no
Mainline partial
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Works
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • limiter121
  • ata2001 (work on Z1C)

Maintainer(s)

  • limiter121

Device owners

  • Konradybcio (Notes: Vibration motor sometimes works (apparently mainline driver is smarter than stock, lol))


What works

  • Display
  • Touchscreen
  • Network through USB
  • Telnet in initramfs
  • SSH
  • Wifi

What does not work

`osk-sdl` doesn't work:


sony-honami:/home/r# osk-sdl -d a -n a -c /etc/osk.conf -v
commandline read: osk-sdl
commandline read: -d
commandline read: a
commandline read: -n
commandline read: a
commandline read: -c
commandline read: /etc/osk.conf
commandline read: -v
(*) Direct/Thread: Started 'SigHandler' (1742) [CRITICAL - OTHER/0] <134492>...

   16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)| DirectFB 1.7.7 |16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)~
        (c) 2012-2015  DirectFB integrated media GmbH
        (c) 2001-2015  The world wide DirectFB Open Source Community
        (c) 2000-2004  Convergence (integrated media) GmbH
      ----------------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2018-10-03 11:56) 
(*) Direct/Memcpy: Using libc memcpy()
(*) Direct/Thread: Started 'Fusion Dispatch' (1743) [MESSAGING - OTHER/0] <134492>...
(*) Direct/Thread: Started 'VT Switcher' (1746) [CRITICAL - OTHER/0] <134492>...
(*) Direct/Thread: Started 'VT Flusher' (1747) [DEFAULT - OTHER/0] <134492>...
(*) DirectFB/FBDev: Found 'mdssfb_80000' (ID 0) with frame buffer at 0x00020000, 16320k (MMIO 0x00000000, 0k)
(*) Direct/Modules: suppress module 'linux_input'
(*) Direct/Thread: Started 'Keyboard Input' (1748) [INPUT - OTHER/0] <134492>...
(*) DirectFB/Input: Keyboard 0.9 (directfb.org)
(*) Direct/Thread: Started 'tslib Input' (1749) [INPUT - OTHER/0] <134492>...
(*) DirectFB/Input: tslib touchscreen 0 0.1 (tslib)
(*) Direct/Thread: Started 'PS/2 Input' (1750) [INPUT - OTHER/0] <134492>...
(*) DirectFB/Input: IMPS/2 Mouse (1) 1.0 (directfb.org)
(*) Direct/Thread: Started 'PS/2 Input' (1751) [INPUT - OTHER/0] <134492>...
(*) DirectFB/Input: IMPS/2 Mouse (2) 1.0 (directfb.org)
(*) DirectFB/Input: Hot-plug detection enabled with Input Hub Driver 
(*) DirectFB/Graphics: Generic Software Rasterizer 0.7 (directfb.org)
(!) DirectFB/FBDev: No supported modes found in /etc/fb.modes and current mode not supported!
(!) DirectFB/FBDev: Current mode's pixelformat: rgba 8/0, 8/8, 8/16, 8/24 (32bit)
(!) DirectFB/Core/layers: Failed to initialize layer 0!
    --> A general initialization error occured
(!) DirectFB/Core: Could not initialize 'layer_core' core!
    --> A general initialization error occured
INFO: /home/buildozer/aports/main/sdl2/src/SDL2-2.0.9/src/video/directfb/SDL_DirectFB_video.c (239):A general initialization error occured
Segmentation fault

How to enter flash mode

Press VOL UP while plugging the USB cable (fastboot mode)

Photos

Other Information

  • It should be possible to run The Mainline Kernel on the device. At least there is a dts file already in the 4.14 kernel: arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
  • USB device id: 0fce:d19a

Links