Jump to content

Asus Transformer Pad Infinity TF700T (asus-tf700t)

From postmarketOS Wiki
ASUS Transformer Infinity
Asus Transformer Infinity (TF700t)
Asus Transformer Infinity (TF700t)
Manufacturer ASUS
Name Transformer Infinity
Codename asus-tf700t
Released 2012
Hardware
Chipset Nvidia Tegra 3 T33
CPU Quad-core 1.6 GHz Cortex-A9
GPU ULP GeForce
Display 1200x1920 IPS
Storage 32/64 GB
Memory 1 GB
Architecture armv7
Software
Original software Android 4.0.3 on Linux 3.1.10
postmarketOS
Category testing
Pre-built images no
Mainline yes
Unixbench Whet/Dhry score 1365.5
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
Works
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
Partial
Audio
Partial
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Works
Bluetooth
Works
GPS
Partial
Miscellaneous
FDE
Works
USB OTG
Works
HDMI/DP
No data
Sensors
Accelerometer
Works
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

Preparation

Kernel status

KatKernel

  • Katkernel is based off the kernel with the same name for the TF300t. An overlap in components makes these kernels mostly compatible hence the rom it belongs to (KatKiss) has been ported to the TF700t aswell. The reason why the kernel is included in this list is because it's currently the most active kernel for the TF700t.
  • Source: https://github.com/timduru/tf300t-katkernel/tree/dev-tf700t/
  • Version: 3.1.10
  • Status: Compiles, is too big to fit on /boot

Mainline (Grate)

Hardware status (mainline)

Status Hardware Info
Y Booting Boot image should be less or equal to 8 MB, /boot partition size.
Y Panel Panasonic VVX10F004B00 or HYDIS HV101WU1-1E1 LCD SuperIPS+ Full HD panel through specific dc bridge controller. Occasionally display may not work on reboot, but if it starts, it will work perfectly fine.
Y HDMI output HDMI works, but output is max. 1080p due to Tegra 3 limitations.
Y Touchscreen Used Elantech ELAN-3024-7053 or 5184N FPC-1 REV: 2/3 touchscreen.
Y USB One full size USB 2.0 in dock or via 40pin adapter.
Y SD cards MicroSD card and full sized SD card (recognized as USB drive) in dock.
Y Internal memory eMMC by Hynix.
P GPS Broadcom GPS BCM4751 is used.
Y WiFi Uses Azurewave AW-NH665 BCM4330, works but is very slow and unstable.
Y Bluetooth Uses Azurewave AW-NH665 BCM4330B1.
Y GPIO keys There is 3 keys on GPIO: Power, Volume up, Volume down.

Additionally GPIO-keys like are LID sensor and Audio dock line-out detect.

Y Vibro Transformer Infinity has GPIO based vibrator.
Y Dock Keyboard Both pad and dock have Nuvoton NPCE795LA0BX embedded controller which handles battery data, charging, leds, keyboard and touchpad. Driver of this EC is mainlined and is fully functional. Keyboard and Touchpad work.

Alt Gr can be used for alternate multimedia keys instead of escape, fn keys, volumes and delete. Alt GR + Lock changes the default key mode.

Y Battery/Charger Driver is based on Texas Instruments bq24725 SMBus Charge Controller driver and GPIO charger but works through pad/dock EC. Charging and charge level of both batteries are shown correctly.
Y PMIC Transformers use Texas Instruments TPS659110 PMIC and TPS62361 core regulator.
P Sound Sound codec is RT5631. Kernel driver and tegra_rt5631 glue driver are added to grate master. ALSA configuration files are available. HDMI Audio works
N Voice processor Transformers use separate Fortemedia FM34NE voice processor, which needs additional maintenance in kernel.
Y Thermal sensor NCT1008 ON Semiconductor LM90 series thermometer.
Y Orientation sensors Include Invensense mpu3050 gyroscope with Kionix KXTF9 accelerometer and Aichi AMI306 3-axis digital compass.
Y Light sensor Driver Dyna-Image AL3010. Brightness regulation works, install iio-sensor-proxy . It's slightly oversensitive.
N Front camera Aptina mi1040 camera sensor.
N Rear camera Fujitsu fjm6mo image processor.
P ULP GeForce GPU Acceleration partially works.

Useful Links