Lenovo ThinkPad X13s (lenovo-21bx)
Appearance
![]() Lenovo X13s running Sway | |
Manufacturer | Lenovo |
---|---|
Name | ThinkPad X13s |
Codename | lenovo-21bx |
Released | 2022 |
Type | laptop |
Hardware | |
Chipset | Qualcomm Snapdragon 8cx Gen 3 (SC8280XP) |
CPU | 4x 3.0GHz (Cortex-X1), 4x 2.4GHz (Cortex-A78) |
GPU | Adreno 690 |
Display | 1920x1200 IPS |
Storage | 256GB, 512GB, 1TB |
Memory | 8GB, 16GB, 32GB |
Architecture | aarch64 |
Software | |
Original software | Windows |
Original version | 11 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
Unixbench Whet/Dhry score | 20658.4 |
Internal storage |
Works |
---|---|
Battery |
Works |
Screen |
Works |
Touchscreen |
No data |
Keyboard |
Works |
Touchpad |
Works |
Multimedia | |
3D Acceleration |
Works |
Audio |
Partial |
Camera |
Broken |
Connectivity | |
WiFi |
Works |
Bluetooth |
Works |
GPS |
Partial |
Modem | |
Mobile data |
Works |
Miscellaneous | |
FDE |
Works |
SATA/eSATA |
No data |
USB OTG |
No data |
HDMI/DP |
Works |
Sensors | |
Hall Effect |
Works |
Power Sensor |
Works |
Contributors
Users owning this device
How to enter flash mode
Installation
Make the following changes in the EFI setup application:
EFI Config Option | Value |
---|---|
Secure Boot | Disabled |
Linux Boot | Enabled |
Use pmbootstrap to build your own installation image.
$ pmbootstrap init
$ pmbootstrap install --fde
WWAN / Mobile Data
With pmaports!4718, mobile data should be working after you enable the FCC unlock script for the modem. The most straight forward way to do this is by just enabling all scripts by:
$ sudo ln -sft /etc/ModemManager/fcc-unlock.d /usr/share/ModemManager/fcc-unlock.available.d/*
Known issues
A list of known issues can be found in the pmaports repository