Samsung Galaxy SIII mini Value Edition (samsung-i8200)
Appearance
| WARNING: This device
is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it. |
| This device is still running on armhf, although it supports armv7. If you own it, change it and test it that way. |
| This device runs a Downstream kernel. Some UIs will not work, and most features (3D acceleration, audio, etc.) may be broken. |
|
Galaxy SIII mini VE | |
| Manufacturer | Samsung |
|---|---|
| Name | Galaxy S III mini Value Edition |
| Codename | samsung-i8200 |
| Released | 2014 |
| Type | handset |
| Hardware | |
| Chipset | Marvell PXA986 |
| CPU | Dual-core 1.2 GHz Cortex-A9 |
| GPU | Vivante GC1000 |
| Display | 480x800 4in |
| Storage | 8/16 GB |
| Memory | 1 GB |
| Architecture | armhf |
| Software | |
Original software The software and version the device was shipped with. |
Android 4.2.2 |
Extended version The most recent supported version from the manufacturer. |
Android |
| postmarketOS | |
| Category | downstream |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
| Device package |
|
| Kernel package |
|
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Partial
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Whether charging and battery level reporting work. |
Untested
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Partial
|
Camera |
Untested
|
| Connectivity | |
WiFi |
Works
|
Bluetooth |
Untested
|
GPS |
Untested
|
| Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Works
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Contributors
- Ashymad
What works
- Wi-Fi (Marvell 88W8787)
- Bluetooth (although untested it should work because it's the same chipset as Wi-Fi)
- FDE
- Touchscreen
- Wayland
- XWayland
What does not work
- Flashing rootfs through Heimdall #581
- Cell
- Audio
- ...
How to enter flash mode
Hold Home+Volume Down+Power then release Power when phone vibrates. Press Volume Up upon seeing warning.
Installation
You can flash rootfs to sdcard or use netcat #456
pmbootstrap init pmbootstrap install --sdcard=/dev/mmcblkX pmbootstrap flasher flash_kernel
Change X in the command to your sdcard device node!
Mainline
There is no support upstream for this SoC.