InFocus New Tab F1 (infocus-flatfish)
Appearance
| WARNING: This device
is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it. |
| This device is still running on armhf, although it supports armv7. If you own it, change it and test it that way. |
| This device runs a Downstream kernel. Some UIs will not work, and most features (3D acceleration, audio, etc.) may be broken. |
|
InFocus New Tab F1 running Weston | |
| Manufacturer | InFocus |
|---|---|
| Name | New Tab F1 |
| Codename | infocus-flatfish |
| Released | 2014 |
| Type | tablet |
| Hardware | |
| Chipset | Allwinner A31 |
| CPU | 4x 1.0 GHz Cortex-A7 |
| GPU | PowerVR SGX544MP2 |
| Display | 800×1280 |
| Storage | 16 GB |
| Memory | 2 GB |
| Architecture | armhf |
| Software | |
Original software The software and version the device was shipped with. |
Firefox OS 1.4 |
Extended version The most recent supported version from the manufacturer. |
Firefox OS |
| postmarketOS | |
| Category | downstream |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
| Device package |
|
| Kernel package |
|
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Whether charging and battery level reporting work. |
Untested
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Partial
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Works
|
Camera |
Untested
|
| Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Works
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Contributors
- Rudloff
Maintainer(s)
- Rudloff
Device owners
How to enter flash mode
The original bootloader can't boot in fastboot mode so you need to flash a new one. You can follow the instructions here.
With the new bootloader, you can now boot into fast boot mode:
- Power off the device.
- Press and HOLD the power key (do not release until after the next step)
- When the boot logo (Firefox OS Contribution Program) appears, press and HOLD the Volume+ key until the Fastboot logo appears. You may now release both buttons.
See also
- !1251 Initial pull request
- More info about the SoC
- Firefox OS Tablet Contribution Program